"Please be patient, while OpenWrt loads ..." is the last message shown by the kernel. That indicates, the userspace isn't working / entered at this state, but mounted successfully.
Mostly that is one of the following cases: - wrong binary format - /etc/preinit isn't executed by default (the bootloader _must not_ override the init= argument to the kernel) mirko (the other one) On Mon, 2009-07-27 at 11:12 +0800, Xiangfu Liu wrote: > Hi there > I work on a jz4740 cpu device. there[1] is all the code. > your can find the kernel patch at [2] > > the .24 kernel is work, but the .28 boot to "Please be patient, while OpenWrt > loads" > then stop. I put rootfs in mmcblk0p1 with ext2. > > I use "tar jxvf openwrt-xburst-rootfs.tgz[3] /media/MMCBLK0P1" to cp the > rootfs to sd card. > > is there something wrong with rootfs? > > thanks for help. > > > [1] http://github.com/lindnermarek/openwrt-x-burst/commits/x-burst > [2] > http://github.com/lindnermarek/openwrt-x-burst/tree/76e7e9d1590d2f1a742c5dc96420e22bc4e5d234/target/linux/xburst > [3] > http://www.openmobilefree.net/other/file/Ben_NanoNote/openwrt-xburst-rootfs.tgz > plain text document attachment (error.message.txt) > NAND Secondary Program Loader > > > > > > U-Boot 2009.06-dirty (Jul 26 2009 - 16:40:30) > > > > Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed 252 MHz) > > DRAM: 32 MB > > NAND: 2048 MiB > > Linux version 2.6.28.10-ge8db213 ([email protected]) (gcc version > 4.1.9 > CPU revision is: 0ad0024f (Ingenic JZRISC) > > CPU clock: 252MHz, System clock: 84MHz, Peripheral clock: 84MHz, Memory > clock: z > Qi Hardware JZ4740 QI_LB60 setup > > Determined physical RAM map: > > memory: 04000000 @ 00000000 (usable) > > User-defined physical RAM map: > > memory: 02000000 @ 00000000 (usable) > > Zone PFN ranges: > > Normal 0x00000000 -> 0x00002000 > > Movable zone start PFN for each node > > early_node_map[1] active PFN ranges > > 0: 0x00000000 -> 0x00002000 > > Built 1 zonelists in Zone order, mobility grouping off. Total pages: 8128 > > Kernel command line: mem=32M console=ttyS0,57600n8 rootfstype=ext2 > root=/dev/mm2 > Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes. > > Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes > > PID hash table entries: 128 (order: 7, 512 bytes) > > ------------[ cut here ]------------ > > WARNING: at kernel/time/clockevents.c:175 () > > Modules linked in: > > Call Trace:[<80024890>] 0x80024890 > > [<80024890>] 0x80024890 > > [<80041188>] 0x80041188 > > [<803df198>] 0x803df198 > > [<80041810>] 0x80041810 > > [<803debd8>] 0x803debd8 > > [<803f2e14>] 0x803f2e14 > > [<803f12c8>] 0x803f12c8 > > [<803ded54>] 0x803ded54 > > [<80067640>] 0x80067640 > > [<80069f28>] 0x80069f28 > > [<80068764>] 0x80068764 > > [<803d95d8>] 0x803d95d8 > > [<803d5938>] 0x803d5938 > > [<803d50d8>] 0x803d50d8 > > > > ---[ end trace 4eaa2a86a8e2da22 ]--- > > Console: colour dummy device 80x25 > > console [ttyS0] enabled > > Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) > > Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) > > Memory: 28252k/32768k available (3186k kernel code, 4516k reserved, 671k > data, ) > Calibrating delay loop... 250.67 BogoMIPS (lpj=1253376) > > Mount-cache hash table entries: 512 > > net_namespace: 288 bytes > > NET: Registered protocol family 16 > > SCSI subsystem initialized > > NET: Registered protocol family 2 > > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > > TCP established hash table entries: 1024 (order: 1, 8192 bytes) > > TCP bind hash table entries: 1024 (order: 0, 4096 bytes) > > TCP: Hash tables configured (established 1024 bind 1024) > > TCP reno registered > > NET: Registered protocol family 1 > > Total 4MB memory at 0x1400000 was reserved for IPU > > squashfs: version 3.0 (2006/03/15) Phillip Lougher > > Registering mini_fo version $Id$ > > JFFS2 version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc. > > msgmni has been set to 55 > > alg: No test for stdrng (krng) > > io scheduler noop registered > > io scheduler anticipatory registered (default) > > io scheduler deadline registered > > io scheduler cfq registered > > jzlcd use 1 framebuffer: > > jzlcd fb[0] phys addr =0x01100000 > > LCDC: PixClock:25200000 LcdClock:63000000 > > Console: switching to colour frame buffer device 40x30 > > fb0: jz-lcd frame buffer device, using 512K of video memory > > JzSOC: char device family. > > JZ UDC hotplug driver registered > > Serial: 8250/16550 driver2 ports, IRQ sharing disabled > > UDC starting pnp monitor thread > > �Wߖ��|[�ޙM�ܝ�ttyS0 at MMIO 0x0 (irq = 9) is a 16550A > > serial8250: ttyS1 at MMIO 0x0 (irq = 8) is a 16550A > > brd: module loaded > > loop: module loaded > > Driver 'sd' needs updating - please use bus_type methods > > Nand DMA request channel 0. > > NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V > 8-bit2 > Nand using two-plane mode, and resized to writesize:8192 oobsize:256 > blocksize: > Scanning device for bad blocks > > Bad eraseblock 16 at 0x00087f000 > > Bad eraseblock 17 at 0x0008ff000 > > Bad eraseblock 18 at 0x00097f000 > > Bad eraseblock 19 at 0x0009ff000 > > Bad eraseblock 20 at 0x000a7f000 > > Bad eraseblock 21 at 0x000aff000 > > Creating 6 MTD partitions on "NAND 2GiB 3,3V 8-bit": > > Creating 1 MTD partitions on "NAND 2GiB 3,3V 8-bit": > > 0x00000000-0x00400000 : "NAND BOOT partition" > > Creating 1 MTD partitions on "NAND 2GiB 3,3V 8-bit": > > 0x00400000-0x00800000 : "NAND KERNEL partition" > > Creating 1 MTD partitions on "NAND 2GiB 3,3V 8-bit": > > 0x00800000-0x20000000 : "NAND ROOTFS partition" > > Creating 1 MTD partitions on "NAND 2GiB 3,3V 8-bit": > > 0x20000000-0x40000000 : "NAND DATA1 partition" > > Creating 1 MTD partitions on "NAND 2GiB 3,3V 8-bit": > > 0x40000000-0x60000000 : "NAND DATA2 partition" > > Creating 1 MTD partitions on "NAND 2GiB 3,3V 8-bit": > > 0x60000000-0x80000000 : "NAND VFAT partition" > > JzSOC Watchdog Timer: timer margin 60 sec > > JZ SD/MMC card driver registered > > JzSOC On-Chip I2S controller registered (DAC: DMA(play):2/IRQ34, > > ADC: DMA(record):1/IRQ33) > > JZ I2S OSS audio driver initialized > > TCP cubic registered > > NET: Registered protocol family 17 > > mmc0: new high speed SD card at address b368 > > mmcblk0: mmc0:b368 NCard 1.85 GiB > > mmcblk0: p1 p2 p3 p4 > > RPC: Registered udp transport module. > > RPC: Registered tcp transport module. > > Waiting 2sec before mounting root device... > > EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended > > VFS: Mounted root (ext2 filesystem). > > Freeing unused kernel memory: 172k freed > > Please be patient, while OpenWrt loads ... > > > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
