Ferenc Wagner wrote: > Hi, > > How well is Linux 2.6.30 on brcm47xx supposed to work? The flash > driver seems to have some problem at least: > > flash init: 0x1c000000 0x02000000 > Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank > Intel/Sharp Extended Query Table at 0x0035 > Using auto-unlock on power-up/resume > cfi_cmdset_0001: Erase suspend on write enabled > Flash device: 0x200000 at 0x1fc00000 > bootloader size: 262144 > Creating 4 MTD partitions on "Physically mapped flash": > 0x000000000000-0x000000040000 : "cfe" > 0x000000040000-0x0000001f0000 : "linux" > 0x000000116000-0x0000001f0000 : "rootfs" > mtd: partition "rootfs" doesn't start on an erase block boundary -- force > read-only > mtd: partition "rootfs_data" created automatically, ofs=65C0000, > len=FFFFFFFFF9C30000 > 0x0000065c0000-0x0000001f0000 : "rootfs_data" > mtd: partition "rootfs_data" is out of reach -- disabled > 0x0000001f0000-0x000000200000 : "nvram" > > Splitting rootfs arrives at a wrong offset/length pair. > (Otherwise the kernel boots into userspace just fine.)
Hi Feri, I looks like your flash chip is only 2MB big, that is too small for an image with kernel 2.6. Did it boot with kernel 2.6.28? If yes, please post the the same output with that kernel. Hauke
signature.asc
Description: OpenPGP digital signature
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
