Adds board support for the TP-Link TL-WR1043ND Based on the Atheros AP81 platform. Presently the RTL8366RB switch support is missing due to no driver. The ethernet works with 5 po...@1gbit but is missing vlan support.
Hope Ive done this right, First time submiting a patch. Signed-off-by: Andrew Tarabaras <[email protected]> Index: target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h =================================================================== --- target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h (revision 18690) +++ target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h (working copy) @@ -139,6 +139,7 @@ AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ + AR71XX_MACH_TL_WR1043ND,/* TP-LINK TL-WR1041ND */ AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ AR71XX_MACH_UBNT_LSX, /* Ubiquiti LSX */ AR71XX_MACH_UBNT_RS, /* Ubiquiti RouterStation */ Index: target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig =================================================================== --- target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig (revision 18690) +++ target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig (working copy) @@ -71,6 +71,10 @@ bool "TP-LINK TL-WR941ND support" default y +config AR71XX_MACH_TL_WR1043ND + bool "TP-LINK TL-WR1043ND support" + default y + config AR71XX_MACH_TEW_632BRP bool "TRENDnet TEW-632BRP support" default y Index: target/linux/ar71xx/files/arch/mips/ar71xx/prom.c =================================================================== --- target/linux/ar71xx/files/arch/mips/ar71xx/prom.c (revision 18690) +++ target/linux/ar71xx/files/arch/mips/ar71xx/prom.c (working copy) @@ -71,6 +71,9 @@ .name = "TL-WR941ND", .mach_type = AR71XX_MACH_TL_WR941ND, }, { + .name = "TL-WR1043ND", + .mach_type = AR71XX_MACH_TL_WR1043ND, + }, { .name = "UBNT-RS", .mach_type = AR71XX_MACH_UBNT_RS, }, { Index: target/linux/ar71xx/files/arch/mips/ar71xx/Makefile =================================================================== --- target/linux/ar71xx/files/arch/mips/ar71xx/Makefile (revision 18690) +++ target/linux/ar71xx/files/arch/mips/ar71xx/Makefile (working copy) @@ -26,6 +26,7 @@ obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o +obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o obj-$(CONFIG_AR71XX_MACH_WNDR3700) += mach-wndr3700.o obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o Index: target/linux/ar71xx/image/Makefile =================================================================== --- target/linux/ar71xx/image/Makefile (revision 18690) +++ target/linux/ar71xx/image/Makefile (working copy) @@ -474,6 +474,10 @@ $(call Image/Build/Template/TPLINK/$(1),tl-wr941ndv2,board=TL-WR941ND,TL-WR941NDv2) endef +define Image/Build/Profile/TLWR1043NDV1 + $(call Image/Build/Template/TPLINK/$(1),tl-wr1043ndv1,board=TL-WR1043ND,TL-WR1043NDv1) +endef + define Image/Build/Profile/WNDR3700 $(call Image/Build/Template/WNDR3700/$(1),wndr3700,board=WNDR3700) endef @@ -503,6 +507,7 @@ $(call Image/Build/Profile/TLWR841NDV3,$(1)) $(call Image/Build/Profile/TLWR841NDV5,$(1)) $(call Image/Build/Profile/TLWR941NDV2,$(1)) + $(call Image/Build/Profile/TLWR1043NDV1,$(1)) $(call Image/Build/Profile/UBNT,$(1)) $(call Image/Build/Profile/WP543,$(1)) $(call Image/Build/Profile/WNDR3700,$(1)) Index: target/linux/ar71xx/profiles/tp-link.mk =================================================================== --- target/linux/ar71xx/profiles/tp-link.mk (revision 18690) +++ target/linux/ar71xx/profiles/tp-link.mk (working copy) @@ -47,3 +47,14 @@ endef $(eval $(call Profile,TLWR941NDV2)) + +define Profile/TLWR1043NDV1 + NAME:=TP-LINK TL-WR1043ND v1 + PACKAGES:=kmod-ath9k hostapd-mini +endef + +define Profile/TLWR1043NDV1/Description + Package set optimized for the TP-LINK TL-WR1043ND v1. +endef + +$(eval $(call Profile,TLWR1043NDV1)) Index: target/linux/ar71xx/config-2.6.30 =================================================================== --- target/linux/ar71xx/config-2.6.30 (revision 18690) +++ target/linux/ar71xx/config-2.6.30 (working copy) @@ -14,6 +14,7 @@ CONFIG_AR71XX_MACH_PB44=y CONFIG_AR71XX_MACH_RB_4XX=y CONFIG_AR71XX_MACH_TEW_632BRP=y +CONFIG_AR71XX_MACH_TL_WR1043ND=y CONFIG_AR71XX_MACH_TL_WR741ND=y CONFIG_AR71XX_MACH_TL_WR941ND=y CONFIG_AR71XX_MACH_UBNT=y Index: target/linux/ar71xx/config-2.6.31 =================================================================== --- target/linux/ar71xx/config-2.6.31 (revision 18690) +++ target/linux/ar71xx/config-2.6.31 (working copy) @@ -17,6 +17,7 @@ CONFIG_AR71XX_MACH_TEW_632BRP=y CONFIG_AR71XX_MACH_TL_WR741ND=y CONFIG_AR71XX_MACH_TL_WR941ND=y +CONFIG_AR71XX_MACH_TL_WR1043ND=y CONFIG_AR71XX_MACH_UBNT=y CONFIG_AR71XX_MACH_WNDR3700=y CONFIG_AR71XX_MACH_WNR2000=y Index: tools/firmware-utils/src/mktplinkfw.c =================================================================== --- tools/firmware-utils/src/mktplinkfw.c (revision 18690) +++ tools/firmware-utils/src/mktplinkfw.c (working copy) @@ -37,6 +37,7 @@ #define HWID_TL_WR841ND_V3 0x08410003 #define HWID_TL_WR841ND_V5 0x08410005 #define HWID_TL_WR941ND_V2 0x09410002 +#define HWID_TL_WR1043ND_V1 0x10430001 #define MD5SUM_LEN 16 @@ -137,6 +138,14 @@ .kernel_ep = 0x80060000, .rootfs_ofs = 0x140000, }, { + .id = "TL-WR1043NDv1", + .hw_id = HWID_TL_WR1043ND_V1, + .hw_rev = 1, + .fw_max_len = 0x7c0000, + .kernel_la = 0x80060000, + .kernel_ep = 0x80060000, + .rootfs_ofs = 0x140000, + }, { /* terminating entry */ } }; Index: target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c =================================================================== --- target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c (revision 0) +++ target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c (revision 0) @@ -0,0 +1,136 @@ +/* + * TP-LINK TL-WR1043ND board support + * + * Copyright (C) 2009 Gabor Juhos <[email protected]> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/input.h> + +#include <asm/mips_machine.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "devices.h" + +#define TL_WR1043ND_GPIO_LED_SYSTEM 2 +#define TL_WR1043ND_GPIO_LED_QSS 5 + +#define TL_WR1043ND_GPIO_BTN_RESET 3 +#define TL_WR1043ND_GPIO_BTN_QSS 7 + +#define TL_WR1043ND_BUTTONS_POLL_INTERVAL 20 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition tl_wr1043nd_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "kernel", + .offset = 0x020000, + .size = 0x140000, + } , { + .name = "rootfs", + .offset = 0x160000, + .size = 0x690000, + } , { + .name = "art", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "firmware", + .offset = 0x020000, + .size = 0x7d0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data tl_wr1043nd_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = tl_wr1043nd_partitions, + .nr_parts = ARRAY_SIZE(tl_wr1043nd_partitions), +#endif +}; + +static struct spi_board_info tl_wr1043nd_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .platform_data = &tl_wr1043nd_flash_data, + } +}; + +static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = { + { + .name = "tl-wr1043nd:green:system", + .gpio = TL_WR1043ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tl-wr1043nd:red:qss", + .gpio = TL_WR1043ND_GPIO_LED_QSS, + .active_low = 1, + } +}; + +static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_0, + .threshold = 5, + .gpio = TL_WR1043ND_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = BTN_1, + .threshold = 5, + .gpio = TL_WR1043ND_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static void __init tl_wr1043nd_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + + ar71xx_set_mac_base(mac); + + ar71xx_add_device_mdio(0x0); + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = 0x0; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + + ar71xx_add_device_usb(); + + ar71xx_add_device_spi(NULL, tl_wr1043nd_spi_info, + ARRAY_SIZE(tl_wr1043nd_spi_info)); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio), + tl_wr1043nd_leds_gpio); + + ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr1043nd_gpio_buttons), + tl_wr1043nd_gpio_buttons); + ar91xx_add_device_wmac(); +} + +MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TP-LINK TL-WR1043ND", tl_wr1043nd_setup); Property changes on: target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c ___________________________________________________________________ Added: svn:executable + * _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
