Hi;
Glibc-2.7 works with EABI support while eglibc-trunk has
compilation errors..
Regards,
KH
_____
From: [email protected]
[mailto:[email protected]] On Behalf Of Teh Kok How
Sent: Wednesday, December 23, 2009 6:10 PM
To: [email protected]
Subject: [OpenWrt-Devel] kamikaze trunk,uClibc-0.9.30.1 Xscale EABI not
working
Hi;
[ 3.390000] device=eth0, addr=10.0.51.200, mask=255.255.255.0,
gw=255.255.255.255,
[ 3.400000] host=ixdp425, domain=, nis-domain=(none),
[ 3.400000] bootserver=10.0.51.38, rootserver=10.0.51.38, rootpath=
[ 3.410000] Looking up port of RPC 100003/2 on 10.0.51.38
[ 3.430000] Looking up port of RPC 100005/1 on 10.0.51.38
[ 3.440000] VFS: Mounted root (nfs filesystem) on device 0:14.
[ 3.440000] Freeing init memory: 124K
[ 3.520000] eth0: link up, speed 100 Mb/s, full duplex
[ 3.590000] Kernel panic - not syncing: Attempted to kill init!
[ 3.600000] [<c002e594>] (unwind_backtrace+0x0/0xe0) from [<c00447dc>]
(panic+0x4c/0x13c)
[ 3.610000] [<c00447dc>] (panic+0x4c/0x13c) from [<c0047fe4>]
(do_exit+0x64/0x708)
[ 3.620000] [<c0047fe4>] (do_exit+0x64/0x708) from [<c0048738>]
(do_group_exit+0xb0/0xe4)
[ 3.620000] [<c0048738>] (do_group_exit+0xb0/0xe4) from [<c00568d8>]
(get_signal_to_deliver+0x390/0x3ec)
[ 3.630000] [<c00568d8>] (get_signal_to_deliver+0x390/0x3ec) from
[<c002a7bc>] (do_notify_resume+0x64/0x5d8)
[ 3.640000] [<c002a7bc>] (do_notify_resume+0x64/0x5d8) from [<c0027f48>]
(work_pending+0x1c/0x20)
[ 3.650000] Rebooting in 1 seconds..
[kh...@khteh-pc:/usr/src/root-ixp4xx 2]$ file bin/busybox
bin/busybox: ELF 32-bit MSB executable, ARM, version 1 (SYSV), dynamically
linked (uses shared libs), stripped
[kh...@khteh-pc:/usr/src/root-ixp4xx 3]$ readelf -h bin/busybox | grep Flags
Flags: 0x5000002, has entry point, Version5
EABI
[kh...@khteh-pc:/usr/src/root-ixp4xx 4]$ readelf -a bin/busybox | grep
NEEDED
0x00000001 (NEEDED) Shared library: [libcrypt.so.0]
0x00000001 (NEEDED) Shared library: [libm.so.0]
0x00000001 (NEEDED) Shared library: [libc.so.0]
[kh...@khteh-pc:/usr/src/root-ixp4xx 5]$ readelf -a bin/busybox | grep -A1
INTERP
INTERP 0x000114 0x00008114 0x00008114 0x00014 0x00014 R 0x1
[Requesting program interpreter: /lib/ld-uClibc.so.0]
[kh...@khteh-pc:/usr/src/root-ixp4xx 6]$ readelf -h
lib/libuClibc-0.9.30.1.so | grep Flags
Flags: 0x5000002, has entry point, Version5
EABI
[kh...@khteh-pc:/usr/src/root-ixp4xx 7]$ readelf -h lib/libm-0.9.30.1.so |
grep Flags
Flags: 0x5000002, has entry point, Version5
EABI
[kh...@khteh-pc:/usr/src/root-ixp4xx 8]$ readelf -h
lib/ld-uClibc-0.9.30.1.so | grep Flags
Flags: 0x5000002, has entry point, Version5
EABI
[kh...@khteh-pc:/usr/src/root-ixp4xx 9]$ readelf -h lib/libcrypt-0.9.30.1.so
| grep Flags
Flags: 0x5000002, has entry point, Version5
EABI
[kh...@khteh-pc:/usr/src/root-ixp4xx 10]$
Attached is the uClibc-0.9.30.1 config that I use. Any insight is
appreciated.
Regards,
KH
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
