2010/2/7 <[email protected]>: > On 07.02.2010 08:38, Damian Lesiuk wrote: >> I think something is wrong with usb-storage kernel driver on wl-500g premium >> v1. > > brcm-2.4? >
brcm47xx >> When I am copying something between partition I have 100 kB/s - 300 >> kB/s, the same action on wl500g.googlecode.com firmware, I have 10 >> mB/s. >> In addition, terribly load increases. Router gets slow. On >> wl500g.googlecode.com firmware I have load 1.2 when copying. > > which filesystem are these? Ext3. > >> >> I am using newest snapshot (3 february or something). >> > > openwrt snapshot? > That snapshot fixes some problems which I had under 8.09.2. That's why I chose it. >> Another question >> >> Why is the kernel consumes so much CPU? > > it shouldn't, something is wrong > >> 10% when the router does nothing, 25% When I am downloading something by >> wget. >> Kernel 2.4 when the router is not doing nothing at all worn out and >> the CPU load was approximately 0. Here, load does not fall below 0.30. >> _______________________________________________ >> openwrt-devel mailing list >> [email protected] >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
