Yes, but there are lots of testpoints around the cpu, I bet some of them are from a jtag port. Without those pins, the only possibility would be an to attach an in-ciruit programmer to the flash chip, but this will be really difficult and the success probability not very high.
2010/3/2 jason duhamell <[email protected]>: > The router does not have jtag pins. it only has a ttl port. > > On Wed, Mar 3, 2010 at 6:55 AM, Bernhard Loos <[email protected]> > wrote: >> >> Do you at least now the positions of the jtag test points? >> >> 2010/3/2 jason duhamell <[email protected]>: >> > >> > >> > On Tue, Mar 2, 2010 at 8:04 AM, jason duhamell <[email protected]> >> > wrote: >> >> >> >> I can not access a command prompt. I believe the only way to flash it >> >> is >> >> from a test clip programmer. >> >> >> >> Jason >> >> >> >> On Tue, Mar 2, 2010 at 7:51 AM, Bernhard Loos >> >> <[email protected]> wrote: >> >>> >> >>> Did you try to flash an ar71xx image? For example the fon one? >> >>> If the kernel at least starts to boot, I can do the rest. Otherwise, >> >>> I'm not so sure. >> >>> >> >>> Bernhard >> >>> >> >>> 2010/3/1 jason duhamell <[email protected]>: >> >>> > Ok, I decided I will start the Job offer at 100 dollars and the >> >>> > board. >> >>> > dont >> >>> > worry about the chip sizes, I control that from the factory side. >> >>> > >> >>> > On Mon, Mar 1, 2010 at 7:07 AM, jason duhamell <[email protected]> >> >>> > wrote: >> >>> >> >> >>> >> Actually it is this. >> >>> >> >> >>> >> http://www.jcg.com.cn/en/display.asp?id=1312&idd=Wireless%20Products >> >>> >> And I can order it wit 4 mb flash or 8mb flash, but i need to fix >> >>> >> the >> >>> >> software on it. >> >>> >> >> >>> >> On Sun, Feb 28, 2010 at 7:46 PM, ulf kypke <[email protected]> >> >>> >> wrote: >> >>> >>> >> >>> >>> hi jason, >> >>> >>> this device looks like an accton oem device similar to the smc >> >>> >>> webt-g. >> >>> >>> it has only 2 mb of flash and 8 mb or ram, this is too less for >> >>> >>> running >> >>> >>> openwrt. >> >>> >>> an other thing is the dc power design, it does not have a dc/dc >> >>> >>> converter, so it will "burn" the rest of power while dropping the >> >>> >>> voltage from 5 volt to 3.3 volt. this is overall not the best >> >>> >>> design. >> >>> >>> cheers ulf >> >>> >>> >> >>> >>> >> >>> >>> 2010/2/28 jason duhamell <[email protected]>: >> >>> >>> > Hello everyone. I have a new product that needs support. It is a >> >>> >>> > ar2317 >> >>> >>> > mini >> >>> >>> > router similar to the fon 2200. When I started it up, It seemed >> >>> >>> > to >> >>> >>> > be >> >>> >>> > running vxworks. I have a job for someone that is expereienced >> >>> >>> > with >> >>> >>> > redboot >> >>> >>> > to help get this device supported for openwrt. Dont worry about >> >>> >>> > the >> >>> >>> > flash >> >>> >>> > and ram, we will upgrade them to 4/16 to support openwrt. Then >> >>> >>> > if >> >>> >>> > someone >> >>> >>> > wants to work on this hardware in person they will need a test >> >>> >>> > clip >> >>> >>> > and >> >>> >>> > soldering skills as this device does not have a jtag. Please >> >>> >>> > email >> >>> >>> > me >> >>> >>> > back >> >>> >>> > and I will discuss the payment. >> >>> >>> > >> >>> >>> > _______________________________________________ >> >>> >>> > openwrt-devel mailing list >> >>> >>> > [email protected] >> >>> >>> > https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> >>> >>> > >> >>> >>> > >> >>> >>> _______________________________________________ >> >>> >>> openwrt-devel mailing list >> >>> >>> [email protected] >> >>> >>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> >>> >> >> >>> > >> >>> > >> >>> > _______________________________________________ >> >>> > openwrt-devel mailing list >> >>> > [email protected] >> >>> > https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> >>> > >> >>> > >> >>> _______________________________________________ >> >>> openwrt-devel mailing list >> >>> [email protected] >> >>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> >> >> > >> > >> > _______________________________________________ >> > openwrt-devel mailing list >> > [email protected] >> > https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> > >> > >> _______________________________________________ >> openwrt-devel mailing list >> [email protected] >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > > _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
