If 2.6.32.10 will be *the* desired version, then Orion can be just
switched to it.
My WRT350Nv2 is really running fine with it.
File: target/linux/orion/Makefile
No need to rebase any patches.
Maddes
On 25.03.2010 22:57, Nico wrote:
> It seems 2.6.32.10 applies on all targets at 2.6.32.9, so I have no
> problem switching to 2.6.32.10. Ideally, it would be great if all
> targets at 2.6.32.x could be switched to the same version (coherency)
> and such updates be committed before Friday evening.
>
> --
> -{Nico}
>
>
> On 25/03/10 22:44, Matthias Buecher / Germany wrote:
>> Sorry, a typo, meant 2.6._32_.10 not .30.10.
>>
>> On 25.03.2010 22:15, Matthias Buecher / Germany wrote:
>>
>>> Do I understand correctly that kernel 2.6.32.9 is one of the preferred
>>> kernels for Backfire, and not 2.6.30.10?
>>> (see https://dev.openwrt.org/changeset/20410 and Nico's [2])
>>> Just want to make sure.
>>>
>>> Maddes
>>>
>>> P.S.:
>>> Will install it onto my LinkSys WRT350Nv2 this weekend if time permits.
>>>
>>> On 24.03.2010 18:15, Nico wrote:
>>>
>>>> Backfire 10.03-rc1 is still based on trunk @ 20254. In "Backfire
>>>> 10.03-rc1" milestone in Trac [1], you can find the diff used attached
>>>> [2] at the end of the page.
>>>>
>>>> 1. https://dev.openwrt.org/milestone/Backfire%2010.03-rc1
>>>> 2.
>>>> https://dev.openwrt.org/attachment/milestone/Backfire%2010.03-rc1/backfire-10.03-rc1-trunk-r20254.diff
>>>>
>>>> Regards,
>>>> --
>>>> -{Nico}
>>>>
>>>>
>>>> Bruno Wolff III wrote:
>>>>
>>>>> On Wed, Mar 24, 2010 at 17:10:25 +0100,
>>>>> Nico <[email protected]> wrote:
>>>>>
>>>>>
>>>>>> *** Release Candidate 1 ***
>>>>>>
>>>>>> The OpenWrt Team would like to announce a release candidate (RC1) of the
>>>>>> next major release, codenamed Backfire. Testing of this build will help
>>>>>> refine the code in preparation of the final release.
>>>>>>
>>>>>> Binaries can be downloaded at
>>>>>> http://downloads.openwrt.org/backfire/10.03-rc1/
>>>>>>
>>>>>>
>>>>> Is there a separate branch for backfire or is it trunk?
>>>>> (I want some extra things built in, and so am interested in doing builds
>>>>> that use the same code as backfire but with a couple of different build
>>>>> options.)
>>>>>
>>>>>
>> _______________________________________________
>> openwrt-devel mailing list
>> [email protected]
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>>
> _______________________________________________
> openwrt-devel mailing list
> [email protected]
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
