If a mac address is set for the lan bridge, e.g.
network.lan.macaddr=00:1a:70:a0:38:80
then it is only set on the bridge itself and not the sub-devices
br-lan Link encap:Ethernet HWaddr 00:1A:70:A0:38:80
lan1 Link encap:Ethernet HWaddr 00:00:00:00:51:81
lan2 Link encap:Ethernet HWaddr 00:00:00:00:51:81
lan3 Link encap:Ethernet HWaddr 00:00:00:00:51:81
lan4 Link encap:Ethernet HWaddr 00:00:00:00:51:81
The attached patch (really simple) also sets the mac address on the
sub-devices.
It is tested and used for some weeks on LinkSys WRT350Nv2 by some forum
members.
It is also a prerequisite for the next WRT350Nv2 patch.
Kind regards
Matthias "Maddes" Bücher
--
http://www.maddes.net/
Home: Earth / Germany / Ruhr-Area
Index: package/base-files/files/lib/network/config.sh
===================================================================
--- package/base-files/files/lib/network/config.sh (revision 20654)
+++ package/base-files/files/lib/network/config.sh (working copy)
@@ -115,6 +115,8 @@
config_get iftype "$config" type
case "$iftype" in
bridge)
+ local macaddr
+ config_get macaddr "$config" macaddr
[ -x /usr/sbin/brctl ] && {
ifconfig "br-$config" 2>/dev/null >/dev/null && {
local newdevs devices
@@ -139,7 +141,7 @@
# result in another setup_interface() call, so we simply stop processing
# the current event at this point.
}
- ifconfig "$iface" up 2>/dev/null >/dev/null
+ ifconfig "$iface" ${macaddr:+hw ether "${macaddr}"} up 2>/dev/null >/dev/null
return 1
}
;;
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
