-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > -------------- > Why can I see the device but not connect??? > 192.168.178.26 is my desktop pc and 192.168.178.1 is the fritz!box. > --------------
Normal. ICMP (Ping) is allowed on WAN but not SSH or Telnet or HTTP. > ---------- > --> SSH is enabled before setting passwd over telnet!!! > --> What is the password??? Why is SSH enabled? > ---------- Normal. SSH is always started, it just does not work because no root pwd has been set and passwordless logins are forbidden. > --------- > I controlled that the device is rebooting over the led´s (turn on and off) > Now the device is booting up and and after bootup telnet should be disabled > and ssh enabled like I set before! > -------- Should, yes. > -------- > What is going on there??? > OpenWrt is not saving my configurations!!!! > -------- Check dmesg and logread after the second boot, sounds like jffs2 is not formatted - maybe your image is too big leaving not enough free blocks for jffs2 ? ~ JoW -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAku8h1QACgkQdputYINPTPPVxwCghq3YLht+qUH7PVg1DvJMCQP0 9yQAn0smiXItEvmvAlTDmpTXzsYdZ4Th =ZHN8 -----END PGP SIGNATURE----- _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
