Nuno,
>I have the following config:
>
>config interface wan
> option device /dev/ttyUSB0
> option proto 3g
> [...]
>
>According to the wiki this connection should come on-line on boot. But don't.
>Wiki also says that the ifname option is mandatory. What would I
>choose for this?
I use "ppp0" for my ifname.
As for the boot problem, I posted about a seemingly-identical issue with 3G
modem bringup in February:
https://lists.openwrt.org/pipermail/openwrt-devel/2010-February/005818.html
The patch I attached previously cured it for me (although the line numbers may
have changed a bit since then):
https://lists.openwrt.org/pipermail/openwrt-devel/attachments/20100204/5f3170c3/attachment.txt
I am unsure if my solution was correct since my change did not get incorporated
into trunk. But I didn't get a NACK either and I forgot to follow up, so I'm
not sure if my patch was the wrong approach or if it was simply overlooked.
Regardless, it got things working for me.
Scott
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
