make menuconfig Kernel modules -> usb support -> kmod-usb-hid Thierry Museux France Wireless Technologies www.fwt.fr msn: [email protected] Tel: + 33 (0) 1 41 08 70 78 Gsm: + 33 (0) 6 15 22 09 62
-----Message d'origine----- De : [email protected] [mailto:[email protected]] De la part de OpenWrt Envoyé : samedi 8 mai 2010 13:23 Cc : [email protected] Objet : [OpenWrt-Tickets] [OpenWrt] #7310: Usb hid device for APC ups is not detected completely (d-link dir-825) #7310: Usb hid device for APC ups is not detected completely (d-link dir-825) --------------------------------+------------------------------------------- Reporter: a...@ | Owner: developers Type: defect | Status: new Priority: normal | Milestone: Backfire 10.03.1 Component: packages | Version: Trunk Keywords: dir-825 usb hid | --------------------------------+------------------------------------------- I have APC BackUPS attached to d-link dir-825 usb port. Router runs backfire 10.03. Kernel sees the device as: r...@wlan-var825:~# lsusb Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub in /proc/bus/usb/devices there is: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=051d ProdID=0002 Rev= 1.06 S: Manufacturer=APC S: Product=Back-UPS ES 700 FW:829.D3 .I USB FW:D3 S: SerialNumber=5B0943T75468 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl=10ms in dmesg there is: hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 2-1: new low speed USB device using ar71xx-ohci and address 2 usb 2-1: configuration #1 chosen from 1 choice generic-usb 0003:051D:0002.0001: claimed by neither input, hiddev nor hidraw However, apcupsd expects /dev/hiddev* to be present, but that device is not there. I found some messages about CONFIG_USB_HIDDEV, but couldn't find anything relevant in menuconfig. I would be really nice to able to monitor ups with this device. -- Ticket URL: <https://dev.openwrt.org/ticket/7310> OpenWrt <http://openwrt.org> Opensource Wireless Router Technology _______________________________________________ openwrt-tickets mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-tickets _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
