This patch adds support for Sparklan WCR-150GN board. Network configuration should be tweaked to make it work fully. The reason it's not in this patch is that ramips target should be modified to support different /etc/config/network files for different boards.
Signed-off-by: Roman Yeryomin <[email protected]> Index: target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c =================================================================== --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c (revision 0) +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c (revision 0) @@ -0,0 +1,68 @@ +/* + * Sparklan WCR-150GN board support + * + * Copyright (C) 2010 Roman Yeryomin <[email protected]> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wcr150gn_partitions[] = { + { + .name = "Bootloader", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Config", + .offset = 0x030000, + .size = 0x040000, + }, { + .name = "Factory", + .offset = 0x040000, + .size = 0x050000, + }, { + .name = "Kernel", + .offset = 0x050000, + .size = 0x120000, + }, { + .name = "rootfs", + .offset = 0x120000, + .size = 0x400000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data wcr150gn_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(wcr150gn_partitions), + .parts = wcr150gn_partitions, +#endif +}; + +static void __init wcr150gn_init(void) +{ + rt305x_gpio_init( RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT ); + rt305x_register_flash(0, &wcr150gn_flash_data); + rt305x_register_ethernet(); + rt305x_register_wifi(); +} + +MIPS_MACHINE(RAMIPS_MACH_WCR150GN, "WCR150GN", "Sparklan WCR-150GN", + wcr150gn_init); Index: target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile =================================================================== --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile (revision 22047) +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile (working copy) @@ -11,6 +11,7 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o Index: target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig =================================================================== --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig (revision 22047) +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig (working copy) @@ -2,6 +2,12 @@ menu "Ralink RT350x machine selection" +config RT305X_MACH_WCR150GN + bool "Sparklan WCR-150GN support" + default y + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_WHR_G300N bool "Buffalo WHR-G300N support" default y Index: target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h =================================================================== --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h (revision 22047) +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h (working copy) @@ -21,6 +21,7 @@ RAMIPS_MACH_DIR_300_REVB, /* D-Link DIR-300 rev B */ /* RT3052 based machines */ + RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */ RAMIPS_MACH_FONERA20N, /* La Fonera 2.0N */ Index: target/linux/ramips/rt305x/config-2.6.34 =================================================================== --- a/target/linux/ramips/rt305x/config-2.6.34 (revision 22047) +++ b/target/linux/ramips/rt305x/config-2.6.34 (working copy) @@ -134,6 +136,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y # CONFIG_RALINK_RT288X is not set CONFIG_RALINK_RT305X=y +CONFIG_RT305X_MACH_WCR150GN=y CONFIG_RT305X_MACH_DIR_300_REVB=y CONFIG_RT305X_MACH_FONERA20N=y CONFIG_RT305X_MACH_V22RW_2X2=y _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
