Hi Miguel, Daniel, For your information, I have managed to recently get those changes mainline:
- bcm963xx mtd partition parser [1] - bcm63xx watchdog driver (not yet pushed) I will ask Maxime to push the OHCI and EHCI usb drivers mainline, so after that the only patches that we have in OpenWrt are: - 070_bcm63xx_enet_vlan_incoming_fixed.patch: according to Maxime, this patch is not exactly valid, and the issue is somewhere else, Daniel, if you want to work this out with him - 100-reset_buttons.patch: depends on the gpio-buttons driver to be merged - 110-gpiodev.patch: useless, /sys/class/gpio/ allows the same kind of usage - 140-new_bcm96348gw_leds.patch: needs to be integrated with the proper board id fixup patch from Jonas Gorski [2] - 150-alice_gate2_leds.patch: ok - 170-board_livebox.patch: not complete, so to be kept until ready - 180-udc_preliminary_support.patch: no objections pushing it, although there are no users of it - 200-extended-platform-devices.patch: ok - 211-nxp-74hc164-gpio-chip-driver.patch: needs to become a SPI driver after [3] - 220-board-D4PW.patch: ok - 221-board-NB4.patch: ok, after nxp-74hc164 has been merged or reworked - 240-spi.patch: needs some rework - 250-6358-enet1-external-mii-clk.patch: needs testing on other BCM6358 boards - 260-no_ehci_over_current_check.patch: not required, over current checking can be turned off by module parameter (so actually we can patch the ehci driver to turn it off by default without supplying the module parameter) [1]:http://git.infradead.org/users/dedekind/l2- mtd-2.6.git/commit/eafa90853c493d4b6b556286d2ccd38c59d1985e [2]: https://lists.openwrt.org/pipermail/openwrt-devel/2010-June/007375.html [3]: http://lkml.org/lkml/2010/9/1/82 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
