I have a bunch of these deployed in a community wireless network, have some issues with some packages, would like to work more on testing/fixing things in trunk, but unfortunately, all the revisions I have tested after r22295 build okay but have failed to boot successfully. Currently, as of r23118, I lose the serial port very early in the boot, immediately after:
Starting program at 0x80001000 It appears it is not only the serial port that goes wonky, the network never gets configured (I don't see any activity over the WAN port (eth0.1) from outside. I would very much like to get this board working again and will work with anyone who will help make that happen. There were some issues with the board getting detected and consequently overwriting the nvram portion of flash that CFE uses, but I am not sure that is really an issue anymore. I would be happy just to get a serial console back so I can see what else might be breaking. Thanks! -- Russell Senior ``I have nine fingers; you have ten.'' [email protected] _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
