Wojciech Dubowik wrote:
> This patch adds support for Iomega iConnect Wireless. Leds and wireless card
> support are still missing.
>
>
> Signed-off-by: Wojciech Dubowik <[email protected]>
>
> ---
>
Hi
All three patches applied. Thanks :)
- Lars
>
> Index: target/linux/kirkwood/profiles/300-Iconnect.mk
> ===================================================================
> --- target/linux/kirkwood/profiles/300-Iconnect.mk (revision 0)
> +++ target/linux/kirkwood/profiles/300-Iconnect.mk (revision 0)
> @@ -0,0 +1,17 @@
> +#
> +# Copyright (C) 2006 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/Iconnect
> + NAME:=Iomega iConnect Wireless
> + PACKAGES:=kmod-i2c-mv64xxx kmod-hwmon-lm63
> +endef
> +
> +define Profile/Iconnect/Description
> + Iomega iConnect Wireless
> +endef
> +
> +$(eval $(call Profile,Iconnect))
> Index: target/linux/kirkwood/patches/200-iconnect.patch
> ===================================================================
> --- target/linux/kirkwood/patches/200-iconnect.patch (revision 0)
> +++ target/linux/kirkwood/patches/200-iconnect.patch (revision 0)
> @@ -0,0 +1,123 @@
> +--- a/arch/arm/mach-kirkwood/Makefile
> ++++ b/arch/arm/mach-kirkwood/Makefile
> +@@ -8,6 +8,7 @@
> + obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
> + obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
> + obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
> ++obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
> + obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
> + obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
> + obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
> +--- a/arch/arm/mach-kirkwood/Kconfig
> ++++ b/arch/arm/mach-kirkwood/Kconfig
> +@@ -105,6 +105,12 @@
> + Say 'Y' here if you want your kernel to support the
> + Seagate FreeAgent DockStar.
> +
> ++config MACH_ICONNECT
> ++ bool "Iomega iConnect Wireless"
> ++ help
> ++ Say 'Y' here if you want your kernel to support the
> ++ Iomega iConnect Wireless.
> ++
> + endmenu
> +
> + endif
> +--- /dev/null
> ++++ b/arch/arm/mach-kirkwood/iconnect-setup.c
> +@@ -1,0 +1,95 @@
> ++/*
> ++ * arch/arm/mach-kirkwood/iconnect-setup.c
> ++ *
> ++ * Iomega iConnect Wireless
> ++ *
> ++ * This file is licensed under the terms of the GNU General Public
> ++ * License version 2. This program is licensed "as is" without any
> ++ * warranty of any kind, whether express or implied.
> ++ */
> ++
> ++#include <linux/kernel.h>
> ++#include <linux/init.h>
> ++#include <linux/platform_device.h>
> ++#include <linux/irq.h>
> ++#include <linux/mtd/partitions.h>
> ++#include <linux/mv643xx_eth.h>
> ++#include <linux/ethtool.h>
> ++#include <asm/mach-types.h>
> ++#include <asm/mach/arch.h>
> ++#include <mach/kirkwood.h>
> ++#include "common.h"
> ++#include "mpp.h"
> ++
> ++static struct mtd_partition iconnect_nand_parts[] = {
> ++ {
> ++ .name = "u-boot",
> ++ .offset = 0,
> ++ .size = SZ_1M
> ++ }, {
> ++ .name = "uImage",
> ++ .offset = MTDPART_OFS_NXTBLK,
> ++ .size = SZ_1M + SZ_2M
> ++ }, {
> ++ .name = "rootfs",
> ++ .offset = MTDPART_OFS_NXTBLK,
> ++ .size = SZ_32M,
> ++ }, {
> ++ .name = "data",
> ++ .offset = MTDPART_OFS_NXTBLK,
> ++ .size = MTDPART_SIZ_FULL
> ++ },
> ++};
> ++
> ++static struct mv643xx_eth_platform_data iconnect_ge00_data = {
> ++ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
> ++};
> ++
> ++static unsigned int iconnect_mpp_config[] __initdata = {
> ++ MPP8_TW_SDA,
> ++ MPP9_TW_SCK,
> ++ MPP10_UART0_TXD,
> ++ MPP11_UART0_RXD,
> ++ MPP28_GPIO,
> ++ 0
> ++};
> ++
> ++static void __init iconnect_init(void)
> ++{
> ++ u32 dev, rev;
> ++
> ++ /*
> ++ * Basic setup. Needs to be called early.
> ++ */
> ++ kirkwood_init();
> ++ kirkwood_mpp_conf(iconnect_mpp_config);
> ++
> ++ kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
> ++ kirkwood_ehci_init();
> ++
> ++ kirkwood_ge00_init(&iconnect_ge00_data);
> ++ kirkwood_pcie_id(&dev, &rev);
> ++
> ++ kirkwood_uart0_init();
> ++ kirkwood_i2c_init();
> ++}
> ++
> ++static int __init iconnect_pci_init(void)
> ++{
> ++ if (machine_is_iconnect())
> ++ kirkwood_pcie_init();
> ++
> ++ return 0;
> ++}
> ++subsys_initcall(iconnect_pci_init);
> ++
> ++
> ++MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
> ++ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
> ++ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
> ++ .boot_params = 0x00000100,
> ++ .init_machine = iconnect_init,
> ++ .map_io = kirkwood_map_io,
> ++ .init_irq = kirkwood_init_irq,
> ++ .timer = &kirkwood_timer,
> ++MACHINE_END
> Index: target/linux/kirkwood/config-default
> ===================================================================
> --- target/linux/kirkwood/config-default (revision 23166)
> +++ target/linux/kirkwood/config-default (working copy)
> @@ -95,6 +95,7 @@
> CONFIG_MACH_DOCKSTAR=y
> # CONFIG_MACH_ESATA_SHEEVAPLUG is not set
> # CONFIG_MACH_GURUPLUG is not set
> +CONFIG_MACH_ICONNECT=y
> # CONFIG_MACH_INETSPACE_V2 is not set
> # CONFIG_MACH_MV88F6281GTW_GE is not set
> # CONFIG_MACH_NET2BIG_V2 is not set
> Index: target/linux/generic/config-2.6.35
> ===================================================================
> --- target/linux/generic/config-2.6.35 (revision 23166)
> +++ target/linux/generic/config-2.6.35 (working copy)
> @@ -837,6 +837,7 @@
> # CONFIG_I2C_ISCH is not set
> # CONFIG_I2C is not set
> # CONFIG_I2C_MPC is not set
> +# CONFIG_I2C_MV64XXX is not set
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_OCORES is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> Index: package/kernel/modules/hwmon.mk
> ===================================================================
> --- package/kernel/modules/hwmon.mk (revision 23166)
> +++ package/kernel/modules/hwmon.mk (working copy)
> @@ -30,7 +30,21 @@
> DEPENDS:=kmod-hwmon-core $(1)
> endef
>
> +define KernelPackage/hwmon-lm63
> + TITLE:=LM63/64 monitoring support
> + KCONFIG:=CONFIG_SENSORS_LM63
> + FILES:=$(LINUX_DIR)/drivers/hwmon/lm63.ko
> + AUTOLOAD:=$(call AutoLoad,60,lm63)
> + $(call AddDepends/hwmon,+kmod-i2c-core)
> +endef
>
> +define KernelPackage/hwmon-lm63/description
> + Kernel module for lm63 and lm64 thermal monitor chip
> +endef
> +
> +$(eval $(call KernelPackage,hwmon-lm63))
> +
> +
> define KernelPackage/hwmon-lm75
> TITLE:=LM75 monitoring support
> KCONFIG:=CONFIG_SENSORS_LM75
> _______________________________________________
> openwrt-devel mailing list
> [email protected]
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
