The DSL-2740B/DSL-2741B rev C2 support was missing the board definition, resulting in a kernel panic on boot. This patch adds it, and also renames the generated image name to properly reflect that it is for the revision C2, and for both the DSL-2740B and DSL-2741B.
Signed-off-by: Jonas Gorski <[email protected]> --- This patch is independent of my previous patches and builds fine without them, there is just a bit of fuzzyness when applying the kernel patch. target/linux/brcm63xx/image/Makefile | 4 +- .../patches-2.6.35/420-board_96358gw.patch | 69 ++++++++++++++++++++ 2 files changed, 71 insertions(+), 2 deletions(-) create mode 100644 target/linux/brcm63xx/patches-2.6.35/420-board_96358gw.patch diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile index e2d63be..1eef4d5 100644 --- a/target/linux/brcm63xx/image/Makefile +++ b/target/linux/brcm63xx/image/Makefile @@ -147,8 +147,8 @@ define Image/Build $(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633) # D-Link DSL-2640B $(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B) - # D-Link DSL-2740B - $(call Image/Build/CFE,$(1),96358GW,6358,DSL2740B) + # D-Link DSL-2740B/DSL-2741B, rev C2 + $(call Image/Build/CFE,$(1),96358GW,6358,DSL274XB-C2) # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B $(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811) diff --git a/target/linux/brcm63xx/patches-2.6.35/420-board_96358gw.patch b/target/linux/brcm63xx/patches-2.6.35/420-board_96358gw.patch new file mode 100644 index 0000000..1618949 --- /dev/null +++ b/target/linux/brcm63xx/patches-2.6.35/420-board_96358gw.patch @@ -0,0 +1,69 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -644,6 +644,58 @@ static struct board_info __initdata boar + * known 6358 boards + */ + #ifdef CONFIG_BCM63XX_CPU_6358 ++ ++static struct board_info __initdata board_96358gw = { ++ .name = "96358GW", ++ .expected_cpu_id = 0x6358, ++ ++ .has_uart0 = 1, ++ .has_enet1 = 1, ++ .has_pci = 1, ++ ++ .enet1 = { ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .leds = { ++ { ++ .name = "power:green", ++ .gpio = 5, ++ .active_low = 0, ++ .default_trigger = "default_on", ++ }, ++ { ++ .name = "power:red", ++ .gpio = 1, ++ }, ++ { ++ .name = "adsl", ++ .gpio = 9, ++ .active_low = 1, ++ }, ++ { ++ .name = "internet:green", ++ .gpio = 2, ++ }, ++ { ++ .name = "internet:red", ++ .gpio = 10, ++ }, ++ }, ++ ++ .buttons = { ++ { ++ .desc = "reset", ++ .gpio = 34, ++ .active_low = 1, ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .threshold = 3, ++ }, ++ }, ++}; ++ + static struct board_info __initdata board_96358vw = { + .name = "96358VW", + .expected_cpu_id = 0x6358, +@@ -1404,6 +1456,7 @@ static const struct board_info __initdat + #endif + + #ifdef CONFIG_BCM63XX_CPU_6358 ++ &board_96358gw, + &board_96358vw, + &board_96358vw2, + &board_AGPFS0, -- 1.5.6.5 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
