On 05/03/11 15:48, Luca Olivetti wrote: > Al 05/03/11 15:30, En/na Luca Olivetti ha escrit: > >> >> Well, I tried with all packages selected properly but the result wasn't very >> encouraging. >> >> First this log message: >> >> IFX_MPS: CPU1 base address is invalid! >> IFX_MPS: firmware download error (-1)! >> >> (probably because cp1_base assignment is commented out in >> arch/mips/lantiq/setup.c?) >> >> Then this when trying tapidemo: >> >> root@OpenWrt:/# tapidemo >> TAPI Demo Version 5.0.1.27 >> VAD is set to: IFX_TAPI_ENC_VAD_NOVAD - no voice activity detection. >> Err with ioctl cmd SIOCGIFADDR Cannot assign requested address. (File: >> ./tapidemo.c, line: 3657) >> Compiled for EASY50712. >> Used board(s) EASY50712. >> Error, firmware file voice_danube_firmware.bin is not found. >> (File: ./device_vmmc.c, line: 196) >> Error, required binaries files are not downloaded. >> (File: ./device_vmmc.c, line: 688) >> Err, Channel 0 is not initialized. (File: ./board_easy50712.c, line: 563) >> Err, Board Initialization failed (Idx 0). (File: ./tapidemo.c, line: 4331) > > > Ok, I have to tell it where the firmware files are on the command line: > > root@OpenWrt:/lib/firmware# tapidemo --path /lib/firmware/ > TAPI Demo Version 5.0.1.27 > VAD is set to: IFX_TAPI_ENC_VAD_NOVAD - no voice activity detection. > Err with ioctl cmd SIOCGIFADDR Cannot assign requested address. (File: > ./tapidemo.c, line: 3657) > CompileIFX_MPS: CPU1 base address is invalid! > IFX_MPS: firmware download error (-1)! > d for EASY50712. > Used board(s) EASY50712. > Filesystem firmware binary used (/lib/firmware/danube_firmware.bin). > Filesystem BBD binary used (/lib/firmware/danube_bbd_fxs.bin). > Err, Failed download FW. (File: ./device_vmmc.c, line: 718) > Err, Channel 0 is not initialized. (File: ./board_easy50712.c, line: 563) > Err, Board Initialization failed (Idx 0). (File: ./tapidemo.c, line: 4331) > > > Bye
hi, what openwrt revision are you using ? John _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
