Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver 
to be present for the BAR's to be mapped.

Signed-off-by: Philip Prindeville <[email protected]>
Index: target/linux/generic/patches-2.6.38/260-geode-mfd.patch
===================================================================
--- target/linux/generic/patches-2.6.38/260-geode-mfd.patch     (revision 0)
+++ target/linux/generic/patches-2.6.38/260-geode-mfd.patch     (revision 0)
@@ -0,0 +1,11 @@
+--- linux-2.6.38.8/drivers/gpio/Kconfig.orig   2011-06-02 19:35:11.000000000 
-0600
++++ linux-2.6.38.8/drivers/gpio/Kconfig        2011-06-29 20:05:20.000000000 
-0600
+@@ -295,7 +295,7 @@ comment "PCI GPIO expanders:"
+ 
+ config GPIO_CS5535
+       tristate "AMD CS5535/CS5536 GPIO support"
+-      depends on PCI && X86 && !CS5535_GPIO
++      depends on PCI && X86 && !CS5535_GPIO && MFD_CS5535
+       help
+         The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
+         can be used for quite a number of things.  The CS5535/6 is found on
Index: target/linux/generic/patches-2.6.39/260-geode-mfd.patch
===================================================================
--- target/linux/generic/patches-2.6.39/260-geode-mfd.patch     (revision 0)
+++ target/linux/generic/patches-2.6.39/260-geode-mfd.patch     (revision 0)
@@ -0,0 +1,11 @@
+--- linux-2.6.39.2/drivers/gpio/Kconfig.orig   2011-06-23 16:06:00.000000000 
-0600
++++ linux-2.6.39.2/drivers/gpio/Kconfig        2011-06-29 22:43:23.000000000 
-0600
+@@ -298,7 +298,7 @@ comment "PCI GPIO expanders:"
+ 
+ config GPIO_CS5535
+       tristate "AMD CS5535/CS5536 GPIO support"
+-      depends on PCI && X86 && !CS5535_GPIO
++      depends on PCI && X86 && !CS5535_GPIO && MFD_CS5535
+       help
+         The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
+         can be used for quite a number of things.  The CS5535/6 is found on
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to