On Sun, Jul 17, 2011 at 12:03:03AM +0200, Luka Perkov wrote:
> Remove unnecessary printf and rename debug to printf.
Don't use previous patch. Use this one instead!
printf's should be replaced with debug's just like they were before
r27488.
Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net >
---
Index: package/uboot-lantiq/files/board/infineon/easy50712/danube.c
===================================================================
--- package/uboot-lantiq/files/board/infineon/easy50712/danube.c
(revision 27625)
+++ package/uboot-lantiq/files/board/infineon/easy50712/danube.c
(working copy)
@@ -259,12 +259,12 @@
/* earlier no valid response is available, at least on Twinpass &
Tantos @ 111MHz, M4530 platform */
udelay(100000);
- printf("\nsearching for Samurai switch ... ");
+ debug("\nsearching for Samurai switch ... ");
if ( (miiphy_read(name, PHYADDR(SAMURAI_ID_REG0), &chipid0)==0) &&
(miiphy_read(name, PHYADDR(SAMURAI_ID_REG1), &chipid1)==0) ) {
if (((chipid0 & 0xFFF0) == ID_SAMURAI_0) &&
((chipid1 & 0x000F) == ID_SAMURAI_1)) {
- printf("found");
+ debug("found");
/* enable "Crossover Auto Detect" + defaults */
/* P0 */
@@ -288,11 +288,10 @@
}
}
- printf("%04X %04x\n", chipid0, chipid1);
- printf("\nsearching for TANTOS switch ... ");
+ debug("\nsearching for TANTOS switch ... ");
if (miiphy_read(name, PHYADDR(0x101), &chipid0) == 0) {
if (chipid0 == ID_TANTOS) {
- printf("found");
+ debug("found");
/* P5 Basic Control: Force Link Up */
miiphy_write(name, PHYADDR(0xA1), 0x0004);
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
