Finally, enable ubifs for kirkwood target.
Signed-off-by: Daniel Golle <[email protected]>
Index: target/linux/kirkwood/image/ubinize.cfg
===================================================================
--- /dev/null (revision 0)
+++ target/linux/kirkwood/image/ubinize.cfg (revision 0)
@@ -0,0 +1,14 @@
+[rootfs]
+# Volume mode (other option is static)
+mode=ubi
+# Source image
+image=root.ubifs
+# Volume ID in UBI image
+vol_id=0
+# Allow for dynamic resize
+vol_type=dynamic
+# Volume name
+vol_name=rootfs
+# Autoresize volume at first mount
+vol_flags=autoresize
+
Index: target/linux/kirkwood/image/Makefile
===================================================================
--- target/linux/kirkwood/image/Makefile (revision 27777)
+++ target/linux/kirkwood/image/Makefile (working copy)
@@ -8,6 +8,8 @@
include $(INCLUDE_DIR)/image.mk
JFFS2OPTS += --little-endian --pagesize=0x800 --no-cleanmarkers --pad
+UBIFS_OPTS += -m 2048 -e 126KiB -c 4096 -Q
+UBINIZE_OPTS += -m 2048 -p 128KiB
define Image/Prepare
cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage
Index: target/linux/kirkwood/Makefile
===================================================================
--- target/linux/kirkwood/Makefile (revision 27777)
+++ target/linux/kirkwood/Makefile (working copy)
@@ -9,10 +9,10 @@
ARCH:=arm
BOARD:=kirkwood
BOARDNAME:=Marvell Kirkwood
-FEATURES:=targz usb jffs2
+FEATURES:=targz usb jffs2 ubifs
MAINTAINER:=Imre Kaloz <[email protected]>
-LINUX_VERSION:=2.6.37.6
+LINUX_VERSION:=3.0
include $(INCLUDE_DIR)/target.mk
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
