Using my own custom build of trunk with the patches provided here<https://dev.openwrt.org/ticket/6580>, I finally got my own image built and flashed to the router. I went from stock firmware -> DD-WRT initial image -> DD-WRT mini image -> OpenWRT. Strangely, my settings from last time I had OpenWRT installed seem to have been preserved. The dual essid set up I had previously configured seems to work now, whereas it hadn't with the image I was using previously.
As far as I can tell, there isn't a DMZ LED on the front of this model. I tried about 10 times to get OpenWrt to boot into failsafe mode, pushing both the Restore and SES buttons for up to 60 seconds. I was however, still able to get to the RT-N16's built-in recovery mode. I think the boot time for this model is much lower (15 seconds at most). So now, SSH is enabled, the image I built shows root having no password set, and the telnet server doesn't seem to be enabled on boot. LuCI is also not enabled. How can I login? I realized in writing this that I may be able to use DD-WRT to create a JFFS partition (this overwriting anything extra in the NAND) and then flash OpenWrt again. Does anyone have any pro tips on getting back into the box? Any and all help is appreciated. Thanks, Jon
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
