This patch adds full support for this router: 
http://www.dealextreme.com/p/portable-wireless-n-3g-router-cdma2000-evdo-td-scdma-hspa-wcdma-45639
This is a resubmit of my previous patch against current trunk. 
I have adjusted mtd partitioning so that built-in dwc_otg&usb would fit in

and cleaned up some unneeded stuff.
Patch attached. 

Signed-off-by: Andrew 'Necromant' Andrianov <[email protected]>

Regards, 
Andrew
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 405e7c4..df2c3cf 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -50,7 +50,8 @@ case "$FIRMWARE" in
 	rt-n15 | \
 	v22rw-2x2 | \
 	wcr150gn | \
-	whr-g300n)
+	whr-g300n | \
+	unbranded-3gn)
 		rt2x00_eeprom_extract "factory" 0 272
 		;;
 
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 33ce13c..a1b1174 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -55,6 +55,9 @@ ramips_board_name() {
 	*"WZR-AGL300NH")
 		name="wzr-agl300nh"
 		;;
+	*"Unbranded 3GN router from DX")
+		name="unbranded-3gn"
+		;;
 	*)
 		name="generic"
 		;;
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index 8571f7a..9c16f34 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -33,4 +33,5 @@ enum ramips_mach_type {
 	RAMIPS_MACH_FONERA20N,		/* La Fonera 2.0N */
 	RAMIPS_MACH_HW550_3G,		/* Aztech HW550-3G */
 	RAMIPS_MACH_MOFI3500_3GN,	/* MoFi Network MOFI3500-3GN */
+	RAMIPS_MACH_UNBRANDED_3GN,	/* Unbranded 3GN router from DX */
 };
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index c24670e..bfdc915 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -43,6 +43,11 @@ config RT305X_MACH_MOFI3500_3GN
 	select RALINK_DEV_GPIO_BUTTONS
 	select RALINK_DEV_GPIO_LEDS
 
+config RT305X_MACH_UNBRANDED_3GN
+	bool "Unbranded 3gn with 4 megs flash"
+	default n
+	
+
 config RT305X_MACH_NW718
 	bool "Netcore NW718"
 	default y
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index cf72456..814ad07 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -16,9 +16,11 @@ obj-$(CONFIG_RT305X_MACH_F5D8235_V2)    += mach-f5d8235-v2.o
 obj-$(CONFIG_RT305X_MACH_FONERA20N)	+= mach-fonera20n.o
 obj-$(CONFIG_RT305X_MACH_HW550_3G)	+= mach-hw550-3g.o
 obj-$(CONFIG_RT305X_MACH_MOFI3500_3GN)	+= mach-mofi3500-3gn.o
+obj-$(CONFIG_RT305X_MACH_UNBRANDED_3GN)	+= mach-noname-3gn.o
 obj-$(CONFIG_RT305X_MACH_NW718)		+= mach-nw718.o
 obj-$(CONFIG_RT305X_MACH_PWH2004)	+= mach-pwh2004.o
 obj-$(CONFIG_RT305X_MACH_RT_G32_REVB)	+= mach-rt-g32-revb.o
 obj-$(CONFIG_RT305X_MACH_V22RW_2X2)	+= mach-v22rw-2x2.o
 obj-$(CONFIG_RT305X_MACH_WCR150GN)	+= mach-wcr150gn.o
 obj-$(CONFIG_RT305X_MACH_WHR_G300N)	+= mach-whr-g300n.o
+
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-noname-3gn.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-noname-3gn.c
new file mode 100644
index 0000000..b9a5b2b
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-noname-3gn.c
@@ -0,0 +1,149 @@
+/*
+ *  Unbranded router from DX board support
+ *  (http://www.dealextreme.com/p/portable-wireless-n-3g-router-cdma2000-evdo-td-scdma-hspa-wcdma-45639)
+ *  This router is also known to be rebranded and sold by a number of local vendors
+ *  in several countries. 
+ * 
+ *  Copyright (C) 2011 Andrew Andrianov <[email protected]>
+ *  Based on MOFI3500-3N code by
+ *  Copyright (C) 2011 Layne Edwards <[email protected]>
+ *  
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+
+#define UNBRADED_3GN_GPIO_LED_3G		9
+#define UNBRADED_3GN_GPIO_LED_GATEWAY		11
+#define UNBRADED_3GN_GPIO_LED_AP		12
+#define UNBRADED_3GN_GPIO_LED_STATION		13
+#define UNBRADED_3GN_GPIO_LED_WPS		14
+
+#define UNBRADED_3GN_GPIO_BUTTON_RESET		10
+#define UNBRADED_3GN_GPIO_BUTTON_CONNECT	7
+#define UNBRADED_3GN_GPIO_BUTTON_WPS		0
+#define UNBRADED_3GN_GPIO_BUTTON_WPS2		8
+
+#define MOFI3500_3GN_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+static struct mtd_partition unbranded_3gn_partitions[] = {
+	{
+		.name	= "u-boot",
+		.offset	= 0,
+		.size	= 0x030000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "devdata",
+		.offset	= 0x030000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "devconf",
+		.offset	= 0x040000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "kernel",
+		.offset	= 0x050000,
+		.size	= 0x0d0000,
+	}, {
+		.name	= "rootfs",
+		.offset	= 0x120000,
+		.size	= 0x2e0000,
+	}, {
+		.name	= "firmware",
+		.offset	= 0x050000,
+		.size	= 0x3b0000,
+	}
+};
+
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data unbranded_3gn_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(unbranded_3gn_partitions),
+	.parts		= unbranded_3gn_partitions,
+#endif
+};
+
+static struct gpio_led unbranded_3gn_leds_gpio[] __initdata = {
+	{
+		.name		= "dx:green:3g",
+		.gpio		= UNBRADED_3GN_GPIO_LED_3G,
+		.active_low	= 1,
+	}, {
+		.name		= "dx:green:gateway",
+		.gpio		= UNBRADED_3GN_GPIO_LED_GATEWAY,
+		.active_low	= 1,
+	}, {
+		.name		= "dx:green:ap",
+		.gpio		= UNBRADED_3GN_GPIO_LED_AP,
+		.active_low	= 1,
+	}, {
+		.name		= "dx:green:wps",
+		.gpio		= UNBRADED_3GN_GPIO_LED_WPS,
+		.active_low	= 1,
+	},{
+		.name		= "dx:green:station",
+		.gpio		= UNBRADED_3GN_GPIO_LED_STATION,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button unbranded_3gn_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset_wps",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= UNBRADED_3GN_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "mode",
+		.type		= EV_KEY,
+		.code		= KEY_M,
+		.threshold	= 3,
+		.gpio		= UNBRADED_3GN_GPIO_BUTTON_CONNECT,
+		.active_low	= 1,
+	}
+};
+
+#define UNBRADED_3GN_GPIO_MODE \
+	((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \
+	 RT305X_GPIO_MODE_MDIO)
+
+static void __init unbranded_3gn_init(void)
+{
+	rt305x_gpio_init(UNBRADED_3GN_GPIO_MODE);
+
+	rt305x_register_flash(0, &unbranded_3gn_flash_data);
+	rt305x_register_ethernet();
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(unbranded_3gn_leds_gpio),
+				  unbranded_3gn_leds_gpio);
+	ramips_register_gpio_buttons(-1, MOFI3500_3GN_BUTTONS_POLL_INTERVAL,
+ 				     ARRAY_SIZE(unbranded_3gn_gpio_buttons),
+ 				     unbranded_3gn_gpio_buttons);
+	rt305x_register_wifi();
+	rt305x_register_wdt();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_UNBRANDED_3GN, "UNBRANDED-3GN", "Unbranded 3GN router from DX",
+	     unbranded_3gn_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 6954399..c984144 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -146,6 +146,13 @@ define Image/Build/Template/RTG32B1
 	$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_rtg32b1,$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
 endef
 
+#mtdlayout_unbranded3gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
+#$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_unbranded3gn,851968,3014656)
+mtdlayout_unbranded3gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2816k(rootfs),3776k@0x50000(firmware)
+define Image/Build/Template/UNBRANDED3GN
+	$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_unbranded3gn,983040,2883584)
+endef
+
 define Image/Build/Profile/RTG32B1
 	$(call Image/Build/Template/RTG32B1,$(1),rt-g32-b1,RT-G32-B1)
 endef
@@ -198,7 +205,6 @@ define Image/Build/Profile/WCR150GN
 	$(call Image/Build/Template/WCR150GN,$(1),wcr150gn,WCR150GN)
 endef
 
-
 mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
 mtd_f5d8235_kernel_part_size=1572864
 mtd_f5d8235_rootfs_part_size=6356992
@@ -210,6 +216,10 @@ define Image/Build/Profile/F5D8235V2
 	$(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
 endef
 
+define Image/Build/Profile/UNBRANDED3GN
+$(call Image/Build/Template/UNBRANDED3GN,$(1),unbranded-3gn,UNBRANDED-3GN)
+endef
+
 
 ifeq ($(CONFIG_RALINK_RT305X),y)
 define Image/Build/Profile/Default
@@ -224,6 +234,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/F5D8235V2,$(1))
 	$(call Image/Build/Profile/HW5503G,$(1))
 	$(call Image/Build/Profile/MOFI35003GN,$(1))
+	$(call Image/Build/Profile/UNBRANDED3GN,$(1))
 endef
 endif
 
diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39
index d5de408..1308f0b 100644
--- a/target/linux/ramips/rt305x/config-2.6.39
+++ b/target/linux/ramips/rt305x/config-2.6.39
@@ -103,7 +103,7 @@ CONFIG_RT305X_MACH_MOFI3500_3GN=y
 CONFIG_RT305X_MACH_NW718=y
 CONFIG_RT305X_MACH_PWH2004=y
 CONFIG_RT305X_MACH_RT_G32_REVB=y
+CONFIG_RT305X_MACH_UNBRANDED_3GN=y
 CONFIG_RT305X_MACH_V22RW_2X2=y
 CONFIG_RT305X_MACH_WCR150GN=y
 CONFIG_RT305X_MACH_WHR_G300N=y
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to