Hello Support for Senao / EnGenius ESR-9753 - RT3052
Signed-off-by: Artur Wronowski <[email protected]> Based on r29577 Index: target/linux/ramips/image/Makefile =================================================================== --- target/linux/ramips/image/Makefile (wersja 29586) +++ target/linux/ramips/image/Makefile (kopia robocza) @@ -191,6 +191,10 @@ $(call Image/Build/Template/GENERIC_4M,$(1),v22rw-2x2,V22RW-2X2) endef +define Image/Build/Profile/ESR9753 + $(call Image/Build/Template/GENERIC_4M,$(1),esr-9753,ESR-9753) +endef + mtdlayout_whrg300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware) define Image/Build/Profile/WHRG300N $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N) @@ -253,6 +257,7 @@ $(call Image/Build/Profile/ARGUS_ATP52B,$(1)) $(call Image/Build/Profile/BC2,$(1)) $(call Image/Build/Profile/DIR300B1,$(1)) + $(call Image/Build/Profile/ESR9753,$(1)) $(call Image/Build/Profile/RTG32B1,$(1)) $(call Image/Build/Profile/FONERA20N,$(1)) $(call Image/Build/Profile/V22RW2X2,$(1)) Index: target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig =================================================================== --- target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig (wersja 29586) +++ target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig (kopia robocza) @@ -81,6 +81,10 @@ select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_ESR_9753 + bool "EnGenius ESR-9753 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS endmenu endif Index: target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile =================================================================== --- target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile (wersja 29586) +++ target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile (kopia robocza) @@ -14,6 +14,7 @@ obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o +obj-$(CONFIG_RT305X_MACH_ESR_9753) += mach-esr-9753.o obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o Index: target/linux/ramips/files/arch/mips/ralink/rt305x/mach-esr-9753.c =================================================================== --- target/linux/ramips/files/arch/mips/ralink/rt305x/mach-esr-9753.c (wersja 0) +++ target/linux/ramips/files/arch/mips/ralink/rt305x/mach-esr-9753.c (kopia robocza) @@ -0,0 +1,122 @@ +/* + * Senao / EnGenius ESR-9753 board support + * + * Copyright (C) 2011 Artur Wronowski <[email protected]> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define ESR_9753_GPIO_LED_POWER 8 +#define ESR_9753_GPIO_LED_WPS 14 + +#define ESR_9753_GPIO_BUTTON_WPS 0 /* active low */ +#define ESR_9753_GPIO_BUTTON_RESET 10 /* active low */ + +#define ESR_9753_BUTTONS_POLL_INTERVAL 20 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition esr_9753_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x0a0000, + }, { + .name = "rootfs", + .offset = 0x150000, + .size = 0x2b0000, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x3b0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data esr_9753_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(esr_9753_partitions), + .parts = esr_9753_partitions, +#endif +}; + +static struct gpio_led esr_9753_leds_gpio[] __initdata = { + { + .name = "esr-9753:orange:power", + .gpio = ESR_9753_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "esr-9753:orange:wps", + .gpio = ESR_9753_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_button esr_9753_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + .gpio = ESR_9753_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .threshold = 3, + .gpio = ESR_9753_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init esr_9753_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0, &esr_9753_flash_data); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(esr_9753_leds_gpio), + esr_9753_leds_gpio); + + ramips_register_gpio_buttons(-1, ESR_9753_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(esr_9753_gpio_buttons), + esr_9753_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_ESR_9753, "ESR-9753", "Senao / EnGenius ESR-9753", esr_9753_init); Index: target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h =================================================================== --- target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h (wersja 29586) +++ target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h (kopia robocza) @@ -27,6 +27,7 @@ /* RT3052 based machines */ RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */ RAMIPS_MACH_BC2, /* NexAira BC2 */ + RAMIPS_MACH_ESR_9753, /* Senao / EnGenius ESR-9753*/ RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */ RAMIPS_MACH_FONERA20N, /* La Fonera 2.0N */ RAMIPS_MACH_HW550_3G, /* Aztech HW550-3G */ Index: target/linux/ramips/files/drivers/net/ramips_esw.c =================================================================== --- target/linux/ramips/files/drivers/net/ramips_esw.c (wersja 29586) +++ target/linux/ramips/files/drivers/net/ramips_esw.c (kopia robocza) @@ -19,6 +19,11 @@ #define RT305X_ESW_REG_FPA2 0xc8 #define RT305X_ESW_REG_FCT2 0xcc #define RT305X_ESW_REG_SGC2 0xe4 +#define RT305X_ESW_REG_P0LED 0xa4 +#define RT305X_ESW_REG_P1LED 0xa8 +#define RT305X_ESW_REG_P2LED 0xac +#define RT305X_ESW_REG_P3LED 0xb0 +#define RT305X_ESW_REG_P4LED 0xb4 #define RT305X_ESW_PCR0_WT_NWAY_DATA_S 16 #define RT305X_ESW_PCR0_WT_PHY_CMD BIT(13) @@ -227,6 +232,13 @@ rt305x_esw_wr(esw, 0x3f502b28, RT305X_ESW_REG_FPA2); rt305x_esw_wr(esw, 0x00000000, RT305X_ESW_REG_FPA); + /* Force Link/Activity on ports */ + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P0LED); + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P1LED); + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P2LED); + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P3LED); + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P4LED); + rt305x_mii_write(esw, 0, 31, 0x8000); for (i = 0; i < 5; i++) { /* TX10 waveform coefficient */ Index: target/linux/ramips/rt305x/config-2.6.39 =================================================================== --- target/linux/ramips/rt305x/config-2.6.39 (wersja 29586) +++ target/linux/ramips/rt305x/config-2.6.39 (kopia robocza) @@ -94,6 +94,7 @@ CONFIG_RT305X_MACH_ARGUS_ATP52B=y CONFIG_RT305X_MACH_BC2=y CONFIG_RT305X_MACH_DIR_300_REVB=y +CONFIG_RT305X_MACH_ESR_9753=y CONFIG_RT305X_MACH_F5D8235_V2=y CONFIG_RT305X_MACH_FONERA20N=y CONFIG_RT305X_MACH_HW550_3G=y Index: target/linux/ramips/rt305x/profiles/engenius.mk =================================================================== --- target/linux/ramips/rt305x/profiles/engenius.mk (wersja 0) +++ target/linux/ramips/rt305x/profiles/engenius.mk (kopia robocza) @@ -0,0 +1,16 @@ +# +# Copyright (C) 2011 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/ESR9753 + NAME:=EnGenius Profile + PACKAGES:= +endef + +define Profile/ESR9753/Description + EnGenius profile. +endef +$(eval $(call Profile,ESR9753)) Index: target/linux/ramips/base-files/lib/ramips.sh =================================================================== --- target/linux/ramips/base-files/lib/ramips.sh (wersja 29586) +++ target/linux/ramips/base-files/lib/ramips.sh (kopia robocza) @@ -107,6 +107,9 @@ *"WR512-3GN-like router") name="wr512-3gn" ;; + *"ESR-9753") + name="esr-9753" + ;; *) name="generic" ;; Index: target/linux/ramips/base-files/lib/preinit/06_set_iface_mac =================================================================== --- target/linux/ramips/base-files/lib/preinit/06_set_iface_mac (wersja 29586) +++ target/linux/ramips/base-files/lib/preinit/06_set_iface_mac (kopia robocza) @@ -8,7 +8,7 @@ . /lib/ramips.sh case $(ramips_board_name) in - bc2 | nw718) + bc2 | nw718 | esr-9753) mac=$(ramips_get_mac_binary factory 4) mac=$(maccalc or "$mac" "02:00:00:00:00:00") ifconfig eth0 hw ether $mac 2>/dev/null Index: target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom =================================================================== --- target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom (wersja 29586) +++ target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom (kopia robocza) @@ -47,6 +47,7 @@ argus-atp52b | \ bc2 | \ + esr-9753 | \ fonera20n | \ hw550-3g | \ mofi3500-3gn | \ Index: target/linux/ramips/base-files/etc/uci-defaults/leds =================================================================== --- target/linux/ramips/base-files/etc/uci-defaults/leds (wersja 29586) +++ target/linux/ramips/base-files/etc/uci-defaults/leds (kopia robocza) @@ -16,6 +16,20 @@ EOF } +set_wifi_led() { + local sysfs="$1" + + uci batch <<EOF +set system.wifi_led=led +set system.wifi_led.name='wifi' +set system.wifi_led.sysfs='$sysfs' +set system.wifi_led.trigger='netdev' +set system.wifi_led.dev='wlan0' +set system.wifi_led.mode='link rx tx' +commit system +EOF +} + board=$(ramips_board_name) case $board in @@ -34,4 +48,6 @@ nw718) set_usb_led "nw718:amber:usb" ;; + esr-9753) + set_wifi_led "rt2800pci-phy0::radio" esac Index: target/linux/ramips/base-files/etc/uci-defaults/network =================================================================== --- target/linux/ramips/base-files/etc/uci-defaults/network (wersja 29586) +++ target/linux/ramips/base-files/etc/uci-defaults/network (kopia robocza) @@ -68,6 +68,7 @@ wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1) ;; + esr-9753 | \ nbg-419n) lan_mac=$(ramips_get_mac_binary factory 4) wan_mac=$(ramips_get_mac_binary factory 40) Index: target/linux/ramips/base-files/etc/diag.sh =================================================================== --- target/linux/ramips/base-files/etc/diag.sh (wersja 29586) +++ target/linux/ramips/base-files/etc/diag.sh (kopia robocza) @@ -63,6 +63,9 @@ whr-g300n) status_led="whr-g300n:green:router" ;; + esr-9753) + status_led="esr-9753:orange:power" + ;; esac } -- Pozdrawiam, Artur http://artekw.net / http://digi-led.pl / GG: 1518171 / Jabber: [email protected] _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
