Hello Peter,
On 01/12/12 00:29, Peter Naulls wrote:
For comedy value, I enabled preemption in my G300NH build:
124.490000] BUG: scheduling while atomic: swconfig/811/0x00000002
[ 124.500000] 2 locks held by swconfig/811:
[ 124.500000] #0: (genl_mutex){+.+...}, at: [<8021cd20>] genl_rcv+0x14/0x34
[ 124.510000] #1: (&(&dev->lock)->rlock){+.+...}, at: [<801d5e48>]
swconfig_get_dev.clone.7+0x7c/0xa0
[ 124.520000] Modules linked in: nf_nat_irc nf_conntrack_irc nf_nat_ftp
nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat xt_conntrack xt_CT
xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 ne
[ 124.570000] Call Trace:
[ 124.580000] [<80287b68>] dump_stack+0x8/0x34
[ 124.580000] [<8028811c>] schedule+0x84/0x50c
[ 124.580000] [<80288b08>] schedule_timeout+0x184/0x1bc
[ 124.590000] [<800839b0>] msleep+0x20/0x30
[ 124.590000] [<801deec4>] rtl8366rb_reset_chip+0x2c/0x90
[ 124.600000] [<801df1c4>] rtl8366rb_sw_reset_switch+0x18/0x74
[ 124.610000] [<801d6274>] swconfig_set_attr+0x1f4/0x23c
[ 124.610000] [<8021cee8>] genl_rcv_msg+0x1a8/0x1f4
[ 124.620000] [<8021c204>] netlink_rcv_skb+0x6c/0xe8
[ 124.620000] [<8021cd30>] genl_rcv+0x24/0x34
[ 124.620000] [<8021ba5c>] netlink_unicast+0x26c/0x350
[ 124.630000] [<8021bde4>] netlink_sendmsg+0x2a4/0x334
[ 124.630000] [<801e93cc>] sock_sendmsg+0x84/0x9c
[ 124.640000] [<801ebecc>] sys_s
The system seemed otherwise ok, but I didn't test beyond this.
Can you describe how you run into this error? Just so that we can
reproduce and fix the problem.
Thanks.
--
Florian
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
