On 21/02/12 09:17, [email protected] wrote: > Hi, > > I've been running the Buffalo WBMR-HP-G300H routers for a while now, > actually three of them on a bonded line, and in general they are working > very well. > > On one of the lines I am seeing very frequent reboots (of the whole > system, not just the DSL) every two or three hours, the other two lines > seem to be stable (although I have seen reboots on the other lines, not > for the last week or so). The "faulty" line is the one that seems to > sync closer to it's limit (it has a smaller noise margin) but it's been > stable with other DSL routers in the past. > > I am going to swap the hardware around, to make sure it's not something > hardware related (they are all running the same firmware), although I > suspect it's a panic caused by the lantiq driver when some situation > happens on the line ... the same router stayed up for over 6 weeks with > no DSL connected while I was puting the build together. > > Is there any way to get a crash dump configured in openwrt so I can get > more info about the reboot cause? > > Thanks, > > Lee. > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel >
crashlog is what you are looking for..... ../o.git/build_dir/linux-lantiq_ar9/linux-3.1.9/patches/generic/930-crashlog.patch _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
