> To clarify : the RB750UP does have a USB port fitted, the RB 750GL does not. > Both RB751U and RB751G have USB fitted.
> >> >> Hi >> this post on the forum >>> https://forum.openwrt.org/viewtopic.php?pid=157075#p157075 >> describes a fairly well advanced port to these Mikrotik routers. I wanted to >> test the patches but could not. As 2.6.39 support, on which this port is >> based has been nuked a couple of weeks ago. >> >> By trial and error (I do not speak C) I might be able to transfer the >> patches to 3.2, however I would prefer the ar71xx maintainers (nbd?) to >> review the changes (links in the forum post) and apply them as appropriate, >> as I have some principle questions about the approach. The linked patches >> introduce ath9k support but not USB, which is therefore missing. The patches >> add 751 specific code into the 750 machine profile. Given they ate so >> different, should there not be a separate rb-751 profile? >> >> On a related topic, while 750 is supported, which is already retired by >> mikrotik, is 750GL and 750UP supported by the 750 profile? There were >> questions about access to the nand storage via the processor gpio pins, but >> this may be resolved by now? Please advise. >> >> PS: happy to supply dmesg and or EEPROM and other dumps if this is helpful. >> >> Hanno Schupp >> >> >>> >>>
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
