The BT Homehub V2B uses the second port by default. The first port appears to be used for DECT communication.
On Sat, Mar 24, 2012 at 6:01 PM, Conor O'Gorman <[email protected]> wrote: > On Thu, 2012-03-22 at 18:44 +0100, John Crispin wrote: >> On 22/03/12 17:48, Spyridon Tompros wrote: >> > As a workaround We've tried to implement another USB port by using an >> > external Vinculum VNC1L Chip. It works connected to a serial port. The >> > problem we encounter now is that the UART0 port of the Danube seems >> > dead.... We discovered that even if we write the respective register >> > (MCON), it remains incactive. Moreover we've tried to include the UART0 >> > as console from the make menuconfig util and the result was the same. >> > >> > Has anybody activated the second serial port of Danube? >> >> >> Hi, >> >> It has worked in the past, but i have not tried it in a while, i have a >> twinpass baord with 2 serial ports and will add this on my todo list for >> tomorrow >> > > Might be a problem in (not) setting the PMU_PWDSR (Power Down Register). > UART0 appears to default to off. Might be some CGU actions needed also. > > Conor > > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
