Hi, I have tested now again with a clean image built from latest snapshot image builder and the issue definitely occurs, while other routers like TL-WR941ND or RB751G, which do not use the rtl8366rb switch are fine. I check the change log and the issue had previously been detected and fixed see https://dev.openwrt.org/ticket/6819). I suspect recent changes to the rtl8366 drivers (30842-30857) introduced this regression. I logged a ticket on https://dev.openwrt.org/ticket/11312
Kind Regards Hanno Schupp On 20/04/2012, at 10:00 AM, Hanno Schupp <[email protected]> wrote: > Dear All, > > I have a curious shop issue in trunk with my tp-link wr1043nd. When I connect > my pc to The router it receives a dhcp lease and ip address without issues. > If I reboot the pc, the same happens, no issues. When I reboot the router > however, the pc does not receive a dhcp lease from the router, it does not > receive an ip address and thus fails to connect thought the router to the > Internet. > Even more curious: if there is a dhcp lease recorded in the modem the openwrt > router is connected to, then the pc receives a dhcp lease from the modem on > their ip range. > Is this behaviour to be expected, a known issue? Any suggestion to debug and > analyse the issue? I am at a loss. > > Kind Regards > > Hanno Schupp > _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
