Hi you don't have to edit hostapd.conf or ... just use /etc/config/wireless (and other /etc/config files)
http://wiki.openwrt.org/doc/recipes/atheroswds if you give a quick scheme/more details you may have a more complete answer (i'm using wds with 4 wr1043nd, and it work perfectly) ----- Mail original ----- De: "Ashkanull" <[email protected]> À: "OpenWrt Development List" <[email protected]> Envoyé: Jeudi 5 Juillet 2012 12:09:15 Objet: [OpenWrt-Devel] hostapd WDS nl80211 mac80211 wds_bridge Hi I'm tryin to understand wds so I'm trying to set one up using some Ar9103 cards , there are some questions regarding it's setup, in hostapd configuration file it's mentioned that it's only supported with driver=nl80211 and I'm guessing I may be using ath9k (mac80211) for these routers (wr1043nd,g300nh,wr941nd). so are there any other programs that is going to handle this since I find nothing regarding wds in hostapd.sh ? is it possible with using wds_bridge=wds-br0 force the wds to talk to other stations on wired network ? if they all operate on same channel I think that would be a good deal to make areas less crowded for each network with a better roaming. I'll appreciate if someone shed some light to this cave thanks _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
