Add 96328A-1441N1 board support (wlan BCM43225).
Flash size is 16M.
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Index: target/linux/brcm63xx/image/Makefile
===================================================================
--- target/linux/brcm63xx/image/Makefile (revisión: 32704)
+++ target/linux/brcm63xx/image/Makefile (copia de trabajo)
@@ -152,6 +152,7 @@
$(call
Image/Build/CFE,$(1),963281TAN,6328,963481TAN-8M-flash-generic,,--pad 4)
$(call
Image/Build/CFE,$(1),963281TAN,6328,963481TAN-16M-flash-generic,,--pad 8)
$(call Image/Build/CFE,$(1),963281T_TEF,6328,963281T_TEF-generic,,--pad
8)
+ $(call
Image/Build/CFE,$(1),96328A-1441N1,6328,96328A-1441N1-generic,,--pad 8)
$(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
$(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,--layoutver 5)
$(call
Image/Build/CFE,$(1),96345GW2,6345,92345GW2-rev,OpenWRT-$(REVISION))
Index: target/linux/brcm63xx/patches-3.3/903-board_96328A-1441N1.patch
===================================================================
--- target/linux/brcm63xx/patches-3.3/903-board_96328A-1441N1.patch
(revisión: 0)
+++ target/linux/brcm63xx/patches-3.3/903-board_96328A-1441N1.patch
(revisión: 0)
@@ -0,0 +1,89 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -419,6 +419,78 @@ static struct board_info __initdata boar
+ },
+ },
+ };
++
++static struct board_info __initdata board_96328A_1441N1 = {
++ .name = "96328A-1441N1",
++ .expected_cpu_id = 0x6328,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .has_enetsw = 1,
++
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++
++ .leds = {
++ {
++ .name = "96328A-1441N1:green:power",
++ .gpio = 8,
++ .default_trigger = "default-on",
++ },
++ {
++ .name = "96328A-1441N1:red:power",
++ .gpio = 4,
++ },
++ {
++ .name = "96328A-1441N1:green:inet",
++ .gpio = 7,
++ },
++ {
++ .name = "96328A-1441N1:red:inet",
++ .gpio = 1,
++ },
++ {
++ .name = "96328A-1441N1:green:dsl",
++ .gpio = 11,
++ .active_low = 1,
++ },
++ },
++
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 23,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ },
++};
+ #endif
+
+ /*
+@@ -2698,6 +2770,7 @@ static const struct board_info __initdat
+ &board_963281TAN,
+ &board_dsl_274xb_f1,
+ &board_963281T_TEF,
++ &board_96328A_1441N1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ &board_96338gw,
Index: target/linux/brcm63xx/base-files/etc/uci-defaults/brcm63xx_fixcrc.sh
===================================================================
--- target/linux/brcm63xx/base-files/etc/uci-defaults/brcm63xx_fixcrc.sh
(revisión: 32704)
+++ target/linux/brcm63xx/base-files/etc/uci-defaults/brcm63xx_fixcrc.sh
(copia de trabajo)
@@ -16,6 +16,7 @@
case "$board_name" in
963281TAN |\
963281T_TEF |\
+ 96328A-1441N1 |\
"CPVA502+" |\
AW4339U |\
CPVA642 |\
Index: target/linux/brcm63xx/base-files/etc/uci-defaults/network
===================================================================
--- target/linux/brcm63xx/base-files/etc/uci-defaults/network (revisión:
32704)
+++ target/linux/brcm63xx/base-files/etc/uci-defaults/network (copia de
trabajo)
@@ -17,6 +17,7 @@
96328avng |\
963281TAN |\
963281T_TEF |\
+96328A-1441N1 |\
96348A-122 |\
96358-502V |\
AW4339U |\
Index: target/linux/brcm63xx/base-files/lib/brcm63xx.sh
===================================================================
--- target/linux/brcm63xx/base-files/lib/brcm63xx.sh (revisión: 32704)
+++ target/linux/brcm63xx/base-files/lib/brcm63xx.sh (copia de trabajo)
@@ -31,6 +31,11 @@
brcm63xx_has_reset_button="true"
ifname=eth0
;;
+ 96328A-1441N1)
+ status_led="96328A-1441N1:green:power"
+ brcm63xx_has_reset_button="true"
+ ifname=eth0
+ ;;
96348GW)
status_led="power"
brcm63xx_has_reset_button="true"
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
