Add Sagem F@ST2604 board support.
Signed-off-by: Álvaro Fernández Rojas<[email protected]>
Index: target/linux/brcm63xx/base-files/etc/uci-defaults/network
===================================================================
--- target/linux/brcm63xx/base-files/etc/uci-defaults/network
+++ target/linux/brcm63xx/base-files/etc/uci-defaults/network
@@ -17,6 +17,7 @@
96328avng |\
963281TAN |\
96348A-122 |\
+"F@ST2604" |\
96358-502V |\
CT6373-1 |\
AW4339U |\
Index: target/linux/brcm63xx/image/Makefile
===================================================================
--- target/linux/brcm63xx/image/Makefile
+++ target/linux/brcm63xx/image/Makefile
@@ -227,6 +227,9 @@
# Sagem F@ST2404
$(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe)
$(call
Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION))
+ # Sagem F@ST2604
+ $(call Image/Build/CFE,$(1),F@ST2604,6348,F@ST2604-cfe)
+ $(call Image/Build/CFE,$(1),F@ST2604,6348,F@ST2604,OpenWRT-$(REVISION))
# Inventel Livebox
$(call Image/Build/RedBoot,livebox)
# Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
Index: target/linux/brcm63xx/patches-3.3/903-hw556_ralink_eeprom.patch
===================================================================
--- target/linux/brcm63xx/patches-3.3/900-board_fast2604.patch
+++ target/linux/brcm63xx/patches-3.3/900-board_fast2604.patch
@@ -0,0 +1,66 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1022,6 +1022,55 @@ static struct board_info __initdata boar
+ .has_ehci0 = 1,
+ };
+
++static struct board_info __initdata board_FAST2604 = {
++ .name = "F@ST2604",
++ .expected_cpu_id = 0x6348,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .leds = {
++ {
++ .name = "F@ST2604:green:power",
++ .gpio = 0,
++ .active_low = 1,
++ .default_trigger = "default-on",
++ },
++ {
++ .name = "F@ST2604:red:power",
++ .gpio = 1,
++ .active_low = 1,
++ },
++ {
++ .name = "F@ST2604:red:inet",
++ .gpio = 4,
++ .active_low = 1,
++ },
++ {
++ .name = "F@ST2604:green:wps",
++ .gpio = 5,
++ .active_low = 1,
++ },
++ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 33,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ },
++};
++
+ static struct board_info __initdata board_rta1025w_16 = {
+ .name = "RTA1025W_16",
+ .expected_cpu_id = 0x6348,
+@@ -2870,6 +2919,7 @@ static const struct board_info __initdat
+ &board_96348gw_10,
+ &board_96348gw_11,
+ &board_FAST2404,
++ &board_FAST2604,
+ &board_DV201AMR,
+ &board_96348gw_a,
+ &board_rta1025w_16,
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
