Thanks. I misunderstood about client mode.
I want to setup like this: Router connect via Ethernet port with 192.168.1.x network. Router create a network 192.168.2.x via its wifi. All client in 192.168.2.x can see each others but do not need to see 192.168.1.x. How can I do? How I tried on my router (FON2100) and not successful: - Tie "wan" interface to eth0, with address 192.168.1.x (static) - Tie "lan" interface to wifi0, with address 192.168.2.x (static), wifi in "AP" mode. From router, I can ping to 192.168.1.x, but from the machine connect to wifi, I cannot ping to other 192.168.2.x machine. Thanks. Le lun. 24 sept. 2012 16:16:17 ICT, Jo-Philipp Wich a écrit : > ********* *DÉBUT CONTENU CHIFFRÉ ou SIGNÉ* ********* > > Hi. > >> The wireless does not works (no OpenWrt SSID show, the wireless LED >> blinks). > > Erm, it is normal that no SSID shows in station mode. You're client to > another network and you're supposed to set the SSID and crypto > settings to those of the target AP you're joining to. > > > ~ Jow > > > ********** *FIN CONTENU CHIFFRÉ ou SIGNÉ* ********** > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > > -- Regards, Quân Y!IM: ng_hquan_vn GTalk: ng.hong.quan _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
