Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and Makefile changes to build images for this target. However, without the userspace bits a ramips machine can't use wifi as the necessary "eeprom" data is to be extracted by a hotplug script; also, sysupgrade support and default led configuration are missing.
An IRC user reported these changes allowed him to use wifi on his hardware. Signed-off-by: Paul Fertser <[email protected]> --- target/linux/ramips/base-files/etc/diag.sh | 2 +- .../etc/hotplug.d/firmware/10-rt2x00-eeprom | 1 + .../linux/ramips/base-files/etc/uci-defaults/leds | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 +++ .../ramips/base-files/lib/upgrade/platform.sh | 1 + 5 files changed, 7 insertions(+), 1 deletions(-) diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 1988e14..b963b8a 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -36,7 +36,7 @@ get_status_led() { argus-atp52b) status_led="argus-atp52b:green:run" ;; - dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-620-a1) + dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-615-d | dir-620-a1) status_led="d-link:green:status" ;; dir-645) diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index bb7f662..ed0d871 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -42,6 +42,7 @@ case "$FIRMWARE" in rt2x00_eeprom_extract "devdata" 0 272 ;; + dir-615-d | \ rt-n10-plus | \ rt-g32-b1) rt2x00_eeprom_extract "devconf" 0 272 diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds index 2fddc01..81d9c44 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/leds @@ -36,6 +36,7 @@ case $board in ucidef_set_led_default "wan" "WAN LED (amber)" "d-link:amber:wan" "1" set_wifi_led "rt2800pci-phy0::radio" ;; + dir-615-d|\ dir-615-h1) ucidef_set_led_default "status" "Status LED (amber)" "d-link:amber:status" "0" set_wifi_led "rt2800pci-phy0::radio" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 3fbba15..f9b874f 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -92,6 +92,9 @@ ramips_board_name() { *"DIR-615 H1") name="dir-615-h1" ;; + *"DIR-615 D") + name="dir-615-d" + ;; *"DIR-645") name="dir-645" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 94db99b..0b53d7e 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -24,6 +24,7 @@ platform_check_image() { dir-600-b1 | \ dir-600-b2 | \ dir-615-h1 | \ + dir-615-d | \ dir-620-a1 | \ dap-1350 | \ esr-9753 | \ -- 1.7.3.4 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
