Not sure, I purposely only have IPv4 enabled at this time though for my build.  
Don't recall the default as that was months ago I went through most of the 
options.

----- Original Message -----
From: "David Woodhouse" <dw...@infradead.org>
To: "John Lauro" <john.la...@covenanteyes.com>
Cc: "OpenWrt Development List" <openwrt-devel@lists.openwrt.org>
Sent: Thursday, November 29, 2012 6:56:29 PM
Subject: Re: [OpenWrt-Devel] Change Default IP?

On Thu, 2012-11-29 at 15:17 -0500, John Lauro wrote:
> I tried preinit and also
> .../trunk/package/base-files/files/etc/config/network
> .../trunk/target/linux/ar7/base-files/etc/config/network
> 
> and it still comes out as 192.168.1.1.   (building for a wndr3800)
> 
> Seems to be lots of network files.  I guess I could have the wrong
> one?  The bin comes out under ar711x.

Hm, do we really only have Legacy IP enabled by default? We should
really set an IPv6 address too (ULA or perhaps site-local). That would
be *much* easier to deal with when connecting it to an existing network.

-- 
dwmw2

_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to