On Saturday 05 January 2013 01:48 AM, Felix Fietkau wrote:
On 2013-01-04 9:11 PM, dvrao wrote:
Hi Imre Kaloz,
With default configurations omap4(Pandaboard) WIFI is not working and
Ethernet is in lan group.
So added default configuration files of a working router(pandaboard)to
change eth0 to wan and added working wlan configs.
Signed-off-by: dvrao <dv...@gytechs.com>
Index: target/linux/omap4/base-files/etc/config/wireless
===================================================================
--- target/linux/omap4/base-files/etc/config/wireless (revision 0)
+++ target/linux/omap4/base-files/etc/config/wireless (revision 0)
@@ -0,0 +1,19 @@
+
+config wifi-device 'radio0'
+ option type 'mac80211'
+ option channel '11'
+ option path
'platform/omap/omap_hsmmc.4/mmc_host/mmc1/mmc1:0001/mmc1:0001:2/wl12xx'
+ list ht_capab 'GF'
+ list ht_capab 'SHORT-GI-20'
+ list ht_capab 'RX-STBC1'
+ option txpower '25'
+ option hwmode '11g'
+ option country '00'
+
+config wifi-iface
+ option device 'radio0'
+ option mode 'ap'
+ option ssid 'Panda'
+ option encryption 'none'
+ option network 'lan'
+
The default configuration in OpenWrt intentionally does not enable
unconfigured, unencrypted wifi by default, as it would expose access to
LAN at a potentially inconvenient time.
Please leave out /etc/config/wireless
- Felix
Hi Felix Fietkau,
As Panda have one Ethernet(WAN mode) and one WIFI Module(LAN).
To access the WEB UI of OpenWrt at least one LAN module must be enabled.
As we have only WIFI module in LAN mode I enabled it by default to
connect and configure initially (after we can enable security).
Is there any way to connect and configure from WAN ?
Thanks & Regards,
dvrao.
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
