This becomes crucial when you are using a generic profile to build an image larger than 4M, e.g. for w502u.
Signed-off-by: Paul Fertser <[email protected]> --- target/linux/ramips/image/Makefile | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 27ac10b..d9e562f 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -206,7 +206,7 @@ mtd_dir300b1_kernel_part_size=917504 mtd_dir300b1_rootfs_part_size=2949120 define BuildFirmware/DIR300B1 $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) - mkwrgimg -s $(4) -d /dev/mtdblock/2 \ + -mkwrgimg -s $(4) -d /dev/mtdblock/2 \ -i $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin endef @@ -218,7 +218,7 @@ endef mtdlayout_dir615h1=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware) define BuildFirmware/DIR615H1 $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir615h1)),917504,2949120) - mkdir615h1 -e $(call sysupname,$(1),$(2)) \ + -mkdir615h1 -e $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin endef @@ -231,7 +231,7 @@ mtd_dap1350_kernel_part_size=1114112 mtd_dap1350_rootfs_part_size=6553600 define BuildFirmware/DAP1350 $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/phys,$(mtdlayout_dap1350)),$(mtd_dap1350_kernel_part_size),$(mtd_dap1350_rootfs_part_size)) - mkdapimg -s $(4) \ + -mkdapimg -s $(4) \ -i $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin endef @@ -421,7 +421,7 @@ rootfs_size_mzkw300nh2=2883584 define BuildFirmware/MZKW300NH2 $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_mzkw300nh2)),$(kernel_size_mzkw300nh2),$(rootfs_size_mzkw300nh2)) $(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,`expr $(kernel_size_mzkw300nh2) - 20`,$(KDIR)/root.$(1),$(rootfs_size_mzkw300nh2),$(call imgname,$(1),$(2))-factory.bin) - mkedimaximg -i $(call imgname,$(1),$(2))-factory.bin \ + -mkedimaximg -i $(call imgname,$(1),$(2))-factory.bin \ -o $(call imgname,$(1),$(2))-factory.bin \ -s CSYS -m RN52 -f 0x50000 -S 0xc0000; endef -- 1.7.9.5 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
