Please ignore the last log. It is wrong (it is when I plugged out the
wire).
Here is the correct one:
OpenWrt daemon.info pppd[4655]: Plugin rp-pppoe.so loaded.
OpenWrt daemon.info pppd[4655]: RP-PPPoE plugin version 3.8p compiled
against pppd 2.4.5
OpenWrt daemon.notice pppd[4655]: pppd 2.4.5 started by root, uid 0
OpenWrt kern.info kernel: [ 2919.450000] eth1: link up (100Mbps/Full
duplex)
OpenWrt daemon.info pppd[4655]: PPP session is 7009
OpenWrt daemon.warn pppd[4655]: Connected to 00:00:5e:00:01:04 via
interface eth1
OpenWrt daemon.info pppd[4655]: Using interface pppoe-wan
OpenWrt daemon.notice pppd[4655]: Connect: pppoe-wan <--> eth1
OpenWrt daemon.info pppd[4655]: Terminating on signal 15
OpenWrt daemon.notice netifd: Interface 'wan' is now down
OpenWrt kern.info kernel: [ 2957.340000] eth1: link down
On Mon 21 Jan 2013 04:51:57 PM ICT, Nguyễn Hồng Quân wrote:
Hello
I've just flashed my router TP-Link WR940N with OpenWrt Backfire and
Attitude Adjustment (same firmware with 941ND). For both OpenWrt
version, the WAN port does not work with PPPoE, though it works with
"static address" protocol.
Could you let me know how to solve this?
Thanks!
--
Regards,
Quân
Y!IM: ng_hquan_vn
GTalk: ng.hong.quan
--
Regards,
Quân
Y!IM: ng_hquan_vn
GTalk: ng.hong.quan
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
