Hi All, This is clearly a revision issue of hardware, but running version of trunk on rb751s that have a serial number of /243 instead of the previous /141 & /229 now will not initialize the radio correctly. Radio chip is exactly the same. The problem appears to be related to the fact that the mac address that is normally exposed in /sys/devices/pci0000:00/0000:00:0.0/ieee80211/phy0 has no mac address defined in the macaddress stub.
The result is that the wifi up command fails to find the radio and fails. We tried latest trunk as well, and problem exists there as well. Flashing same image to earlier versions of hardware work fine. Any help/pointers in how we need to modify the mach-rb750.c file appropriately to grab the initialize the new radio correctly with a correct mac address on these boards would be appreciated as we have 150 of them sitting in boxes that were intended to be deployed. Thanks! Kelly Hogan BlueMesh _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
