On 01/14/2013 04:12 AM, Nathan Hintz wrote: > Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2 > in /lib/preinit/05_init_interfaces_brcm. The list of devices will need to > be expanded. Is there a way to determine the correct cpu_port to use in a > generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if > "/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists? Could > a similar method be used in "/etc/init.d/netconfig"? > > Signed-off-by: Nathan Hintz <[email protected]> > > Index: target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm > =================================================================== > --- target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm > (revision 35146) > +++ target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm > (working copy) > @@ -12,6 +12,7 @@ > # hardware specific overrides > case "$(cat /proc/diag/model)" in > "Linksys WAP54G V1") ifname=eth1;; > + "Linksys E3000 V1"|"Linksys WRT610N V2") cpu_port="8u*";; > "ASUS WL-HDD") ifname=eth1;; > "ASUS WL-300g") ifname=eth1;; > "ASUS (unknown, BCM4702)") ifname=eth1;; >
Thank you for your patch, till we do not have a better solution I applied it in r35491. Hauke _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
