On 02/25/2013 03:07 AM, Dirk Neukirchen wrote: > WNDR3400v2 is based on BCM53xx . Image that is created breaks the router > somehow therefore "#". > > CFE and NVRAM contain different vars - example: > CFE line original: Device eth0: hwaddr 74-44-01-37-C6-69, ipaddr > 192.168.1.1, mask 255.255.255.0 > CFE after openwrt: Device eth0: hwaddr 00-FF-FF-FF-FF-FF, ipaddr > 192.168.1.1, mask 255.255.255.0 > > Logs were posted earlier on this mailing list: > https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html > Different logs with factory firmware are in the wiki: > http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2 > (and on wikidevi for example) > > Signed off by: Dirk Neukirchen <[email protected]>
Thank you for the patch, it was committed in r35790. This patch was wrongly formated, e.g. all tabs where replaced by some spaces. 260-MIPS-BCM47XX-add-board-detection.patch was broken, you also have to change the header with the length of the patch if you add something. Hauke _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
