Marek, so I built r35506 and flashed my OM2P-HS with it. As before booting the device work fine (which is different than what Petr observed).
But when I enable wifi, dmesg shows: [ 132.560000] br-lan: port 2(wlan0) entered forwarding state [ 132.660000] ------------[ cut here ]------------ [ 132.660000] WARNING: at /home/openwrt/openwrt-trunk-35506/build_dir/target-mips_r2_uClibc-0.9.33.2/linux-ar71xx_generic/compat-wireless-2013-01-07/drivers/net/wireless/ath/ath9k/hw.c:789 ar9003_get_pll_sqsum_dvc+0x90/0x108 [ath9k_hw]() [ 132.680000] Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoe xt_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 132.740000] Call Trace: [ 132.740000] [<80071304>] dump_stack+0x8/0x34 [ 132.750000] [<80079d50>] warn_slowpath_common+0x78/0xa4 [ 132.750000] [<80079d94>] warn_slowpath_null+0x18/0x24 [ 132.760000] [<83103874>] ar9003_get_pll_sqsum_dvc+0x90/0x108 [ath9k_hw] [ 132.760000] [<830ea3c8>] ath_hw_pll_work+0x40/0xd4 [ath9k] [ 132.770000] [<8008f4f8>] process_one_work+0x224/0x380 [ 132.780000] [<8008fb08>] worker_thread+0x2cc/0x3dc [ 132.780000] [<80093d7c>] kthread+0xb0/0xb8 [ 132.780000] [<8006ea14>] kernel_thread_helper+0x10/0x18 [ 132.790000] [ 132.790000] ---[ end trace 49fba4705a4a649f ]--- [ 132.800000] ath: phy0: PLL4 meaurement not done [ 132.910000] ath: phy0: PLL4 meaurement not done [ 133.020000] ath: phy0: PLL4 meaurement not done [ 133.130000] ath: phy0: PLL4 meaurement not done ... And I never see any SSID beacons. So do you have wifi up on your OM2P-HS? Thanks. Paul On Wed, Mar 6, 2013 at 11:50 AM, Marek Lindner <[email protected]>wrote: > On Wednesday, March 06, 2013 22:51:15 Paul van Gool wrote: > > what SVN branch and revision are you using? I can switch to that for now. > > I am currently using trunk r35506: > > $ cat /etc/openwrt_version > r35506 > > $ cat /proc/cpuinfo > system type : Atheros AR9341 rev 1 > machine : OpenMesh OM2P HS > processor : 0 > cpu model : MIPS 74Kc V4.12 > BogoMIPS : 266.64 > wait instruction : yes > microsecond timers : yes > tlb_entries : 32 > extra interrupt vector : yes > hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0828, > 0x0000, 0x0020] > ASEs implemented : mips16 > shadow register sets : 1 > kscratch registers : 0 > core : 0 > VCED exceptions : not available > VCEI exceptions : not available > > dmesg attached for your reference. Everything looks normal & good. > > Cheers, > Marek > -- Paul van Gool [email protected]
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
