Error in using another MDIO(AP123 platform using only one GE1 device for eth0 and eth1) for the router mr3420v2 From Dmesg:
[ 0.800000] libphy: ag71xx_mdio: probed [ 0.810000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII [ 1.370000] ag71xx ag71xx.0 eth0: invalid speed specified [ 1.370000] ag71xx: probe of ag71xx.0 failed with error -22 [ 1.380000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII [ 1.930000] ag71xx ag71xx.1 eth0: invalid speed specified [ 1.940000] ag71xx: probe of ag71xx.1 failed with error -22 Сonfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779 Routers in this sense are the same and the only difference is: USB port, USB led, instead of the GPIO-switch we have GPIO-button. Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c =================================================================== --- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c (revision 36006) +++ target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c (working copy) @@ -136,6 +136,8 @@ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); + ath79_register_mdio(1, 0x0); + ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1); ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); @@ -164,8 +166,6 @@ ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL, ARRAY_SIZE(tl_wr841n_v8_gpio_keys), tl_wr841n_v8_gpio_keys); - - ath79_register_mdio(1, 0x0); } MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", "TP-LINK TL-WR841N/ND v8", @@ -182,8 +182,6 @@ ARRAY_SIZE(tl_mr3420v2_gpio_keys), tl_mr3420v2_gpio_keys); - ath79_register_mdio(0, 0x0); - /* enable power for the USB port */ gpio_request_one(TL_MR3420V2_GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
