Hello,
I'm experiencing some issues with access point and wpa_supplicant. I'm
trying to set up an AP and and client, but I don't know why I cannot
connect them. I know that it doesn't work since in the LUCI wifi tab I
can read the message Wireless is disabled or not associated
I was looking into the log but there is nothing there similar to an
error neither with dmesg... What's more, if I type
wifi
command failed: Device or resource busy (-16)
Successfully initialized wpa_supplicant
I was prompted that output
Something mor of info
root ~# ps
...
10461 root 1392 S wpa_supplicant -B -P /var/run/wifi-wlan1.pid
-D nl80211 -i wlan1 -c /var/run/wpa_supplicant-wlan1.conf
...
root@router11:~# cat /var/run/wpa_supplicant-wlan1.conf
ctrl_interface=/var/run/wpa_supplicant-wlan1
network={
scan_ssid=1
ssid="openWRT"
bssid=XX:XX:XX:XX:XX:XX
key_mgmt=NONE
fixed_freq=1
}
Any hint would be appreciated!
Thanks in advance
PS: I forgot, I work with Attitude adjustment 12.09-rc1 on a tplinnk wdr 4300
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
