What device is this? What version of OpenWRT are you running? There is a bug open here: https://dev.openwrt.org/ticket/7502
On Sun, Jun 23, 2013 at 1:08 PM, Tomislav Požega <[email protected]>wrote: > cannot access router even in failsafe mode, most likely due to roboswitch > errors > > someone else reported exact same problem here - > http://eko.one.pl/forum/viewtopic.php?id=6363 > > log file shows errors only when entering failsafe mode: > > Press the [f] key and hit [enter] to enter failsafe mode > f > [ 8.056000] b44 ssb0:0: eth0: powering down PHY > [ 8.064000] roboswitch: failed to write mdio reg: 24 with err -22. > [ 8.072000] roboswitch: failed to write mdio reg: 16 with err -22. > [ 8.080000] roboswitch: failed to write mdio reg: 17 with err -22. > [ 8.084000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.092000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.096000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.104000] roboswitch: timeout in robo_reg on page 52 and reg 16 with > op 1. > [ 8.112000] roboswitch: failed to write mdio reg: 24 with err -22. > [ 8.116000] roboswitch: failed to write mdio reg: 16 with err -22. > [ 8.124000] roboswitch: failed to write mdio reg: 17 with err -22. > [ 8.132000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.136000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.144000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.148000] roboswitch: timeout in robo_reg on page 52 and reg 18 with > op 1. > [ 8.156000] roboswitch: failed to write mdio reg: 24 with err -22. > [ 8.164000] roboswitch: failed to write mdio reg: 16 with err -22. > [ 8.172000] roboswitch: failed to write mdio reg: 17 with err -22. > [ 8.176000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.184000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.188000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.196000] roboswitch: timeout in robo_reg on page 52 and reg 20 with > op 1. > [ 8.204000] roboswitch: failed to write mdio reg: 24 with err -22. > [ 8.208000] roboswitch: failed to write mdio reg: 16 with err -22. > [ 8.216000] roboswitch: failed to write mdio reg: 17 with err -22. > [ 8.224000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.228000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.236000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.244000] roboswitch: timeout in robo_reg on page 52 and reg 22 with > op 1. > [ 8.248000] roboswitch: failed to write mdio reg: 24 with err -22. > [ 8.256000] roboswitch: failed to write mdio reg: 16 with err -22. > [ 8.264000] roboswitch: failed to write mdio reg: 17 with err -22. > [ 8.268000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.276000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.280000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.288000] roboswitch: timeout in robo_reg on page 52 and reg 24 with > op 1. > [ 8.296000] roboswitch: failed to write mdio reg: 24 with err -22. > [ 8.304000] roboswitch: failed to write mdio reg: 16 with err -22. > [ 8.308000] roboswitch: failed to write mdio reg: 17 with err -22. > [ 8.316000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.320000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.328000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.336000] roboswitch: timeout in robo_reg on page 52 and reg 26 with > op 1. > [ 8.340000] roboswitch: failed to write mdio reg: 24 with err -22. > [ 8.348000] roboswitch: failed to write mdio reg: 25 with err -22. > [ 8.356000] roboswitch: failed to write mdio reg: 16 with err -22. > [ 8.360000] roboswitch: failed to write mdio reg: 17 with err -22. > [ 8.368000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.376000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.380000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.388000] roboswitch: timeout in robo_reg on page 52 and reg 8 with > op 1. > [ 8.396000] roboswitch: failed to write mdio reg: 24 with err -22. > [ 8.400000] roboswitch: failed to write mdio reg: 16 with err -22. > [ 8.408000] roboswitch: failed to write mdio reg: 17 with err -22. > [ 8.412000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.420000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.428000] roboswitch: failed to read mdio reg 17 with err -22. > [ 8.432000] roboswitch: timeout in robo_reg on page 52 and reg 6 with > op 1. > [ 8.484000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex > [ 8.488000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX > - failsafe - > > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
