GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894
Signed-off-by: Cezary Jackiewicz <[email protected]>
---
Index: package/kernel/broadcom-diag/src/diag.c
===================================================================
--- package/kernel/broadcom-diag/src/diag.c (revision 37665)
+++ package/kernel/broadcom-diag/src/diag.c (working copy)
@@ -91,6 +91,7 @@
E1000V1,
E3000V1,
E3200V1,
+ E4200V1,
/* ASUS */
WLHDD,
@@ -496,6 +497,16 @@
{ .name = "power", .gpio = 1 << 3, .polarity =
REVERSE }, /* Power LED */
},
},
+ [E4200V1] = {
+ .name = "Linksys E4200 V1",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "wps", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 5, .polarity =
REVERSE },
+ },
+ },
/* Asus */
[WLHDD] = {
.name = "ASUS WL-HDD",
@@ -1348,6 +1359,8 @@
return &platforms[E3000V1];
case BCM47XX_BOARD_LINKSYS_E3200V1:
return &platforms[E3200V1];
+ case BCM47XX_BOARD_LINKSYS_E4200V1:
+ return &platforms[E4200V1];
case BCM47XX_BOARD_LINKSYS_WRT150NV1:
return &platforms[WRT150NV1];
case BCM47XX_BOARD_LINKSYS_WRT150NV11:
--
Pozdrawiam,
Cezary Jackiewicz
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
