By default generate the configuaration:
config interface 'lan'
option ifname 'eth0.1'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '64'
config interface 'wan'
option ifname 'eth1'
option proto 'dhcp'
config alias 'wan6'
option interface 'wan'
option proto 'dhcpv6'
option reqprefix 60
Critically this uses the config alias syntax when generating wan6 allowing
wan6 to actually work.
As both a sample and because it is the proper location move the request
for a /60 from the lan to the wan interface, and use the proper directive
reqprefix.
On the lan interface only assign a /64. Anything else is over kill or
breaks slack depending on how it is implemented.
This configuration was tested and works for my native ipv6 at home
with comcast cable.
Signed-off-by: Eric W. Biederman <[email protected]>
---
.../base-files/files/lib/functions/uci-defaults.sh | 7 ++++---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/package/base-files/files/lib/functions/uci-defaults.sh
b/package/base-files/files/lib/functions/uci-defaults.sh
index bf6fe1e..f284c24 100644
--- a/package/base-files/files/lib/functions/uci-defaults.sh
+++ b/package/base-files/files/lib/functions/uci-defaults.sh
@@ -176,7 +176,7 @@ set network.lan.type='bridge'
set network.lan.proto='static'
set network.lan.ipaddr='192.168.1.1'
set network.lan.netmask='255.255.255.0'
-set network.lan.ip6assign='60'
+set network.lan.ip6assign='64'
EOF
}
@@ -187,9 +187,10 @@ ucidef_set_interface_wan() {
set network.wan='interface'
set network.wan.ifname='$ifname'
set network.wan.proto='dhcp'
-set network.wan6='interface'
-set network.wan6.ifname='@wan'
+set network.wan6='alias'
+set network.wan6.interface='wan'
set network.wan6.proto='dhcpv6'
+set network.wan6.reqprefix='60'
EOF
}
--
1.7.2.5
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
