From: Zachary Catlin <[email protected]> This patch adds board detection for the Linksys E1000 V2.1 router, as well as GPIO support for same.
Signed-off-by: Zachary Catlin <[email protected]> --- NOTE: This is identical to the patch I sent earlier today (local time), but the first time around my mail client messed up spaces in the diff. Trying again with a different client. This fixes bug #14135. Currently, wired networking isn't working on the router, and I haven't tried the wireless, but with this patch, OpenWRT successfully boots, and all the LEDs and buttons work properly. =================================================================== --- target/linux/brcm47xx/patches-3.10/260-MIPS-BCM47XX-add-board-detection.patch (revision 37919) +++ target/linux/brcm47xx/patches-3.10/260-MIPS-BCM47XX-add-board-detection.patch (working copy) @@ -8,7 +8,7 @@ obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o --- /dev/null +++ b/arch/mips/bcm47xx/board.c -@@ -0,0 +1,240 @@ +@@ -0,0 +1,241 @@ +#include <linux/export.h> +#include <linux/string.h> +#include <bcm47xx_board.h> @@ -101,6 +101,7 @@ + {{BCM47XX_BOARD_CISCO_M20V1, "Cisco M20"}, "M20", "1.0"}, /* like WRT310N v2.0 */ + {{BCM47XX_BOARD_LINKSYS_E1000V1, "Linksys E1000 V1"}, "E100", "1.0"}, /* like WRT160N v3.0 */ + {{BCM47XX_BOARD_LINKSYS_E1000V2, "Linksys E1000 V2"}, "E1000", "2.0"}, ++ {{BCM47XX_BOARD_LINKSYS_E1000V21, "Linksys E1000 V2.1"}, "E1000", "2.1"}, + {{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"}, /* like WRT610N v2.0 */ + {{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"}, @@ -251,7 +252,7 @@ +EXPORT_SYMBOL(bcm47xx_board_get_name); --- /dev/null +++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h -@@ -0,0 +1,97 @@ +@@ -0,0 +1,98 @@ +#ifndef __BCM47XX_BOARD_H +#define __BCM47XX_BOARD_H + @@ -302,6 +303,7 @@ + + BCM47XX_BOARD_LINKSYS_E1000V1, + BCM47XX_BOARD_LINKSYS_E1000V2, ++ BCM47XX_BOARD_LINKSYS_E1000V21, + BCM47XX_BOARD_LINKSYS_E2000V1, + BCM47XX_BOARD_LINKSYS_E3000V1, + BCM47XX_BOARD_LINKSYS_E3200V1, Index: package/kernel/broadcom-diag/src/diag.c =================================================================== --- package/kernel/broadcom-diag/src/diag.c (revision 37919) +++ package/kernel/broadcom-diag/src/diag.c (working copy) @@ -89,6 +89,7 @@ WRT610N, WRT610NV2, E1000V1, + E1000V21, E3000V1, E3200V1, E4200V1, @@ -471,6 +472,19 @@ { .name = "ses_orange", .gpio = 1 << 2, .polarity = REVERSE }, /* nvram get gpio2=wps_status_led */ }, }, + [E1000V21] = { + .name = "Linksys E1000 V2.1", + .buttons = { + { .name = "reset", .gpio = 1 << 10 }, /* nvram get reset_gpio=10 */ + { .name = "wps", .gpio = 1 << 9 }, /* nvram get gpio9=wps_button */ + }, + .leds = { + { .name = "power", .gpio = 1 << 6, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 5, .polarity = NORMAL }, + { .name = "ses_blue", .gpio = 1 << 8, .polarity = NORMAL }, /* nvram get gpio8=wps_led */ + { .name = "ses_orange", .gpio = 1 << 7, .polarity = NORMAL }, /* nvram get gpio7=wps_status_led */ + }, + }, [E3000V1] = { .name = "Linksys E3000 V1", .buttons = { @@ -1349,6 +1363,8 @@ return &platforms[DIR330]; case BCM47XX_BOARD_LINKSYS_E1000V1: return &platforms[E1000V1]; + case BCM47XX_BOARD_LINKSYS_E1000V21: + return &platforms[E1000V21]; case BCM47XX_BOARD_LINKSYS_E3000V1: return &platforms[E3000V1]; case BCM47XX_BOARD_LINKSYS_E3200V1: _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
