This patch adds support for TP-Link TL-MR13U router with built-in 10AH rechargeable battery.
The patch is based on kamwanlai's patch: https://forum.openwrt.org/viewtopic.php?pid=206746#p206746 Updated to accommodate recent changes introduced with: ar71xx: remove fs_* variables from image/Makefile Signed-off-by: Oleg Titov <[email protected]> --- target/linux/ar71xx/base-files/etc/diag.sh | 1 + .../ar71xx/base-files/etc/uci-defaults/02_network | 1 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 6 ++ .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + target/linux/ar71xx/config-3.10 | 1 + .../ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c | 107 +++++++++++++++++++++ target/linux/ar71xx/generic/profiles/tp-link.mk | 11 +++ target/linux/ar71xx/image/Makefile | 1 + .../patches-3.10/930-add-tl-mr13u-support.patch | 39 ++++++++ tools/firmware-utils/src/mktplinkfw.c | 6 ++ 10 files changed, 174 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c create mode 100644 target/linux/ar71xx/patches-3.10/930-add-tl-mr13u-support.patch diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 7b790e2..381d4e8 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -135,6 +135,7 @@ get_status_led() { ;; archer-c7 | \ tl-mr10u | \ + tl-mr13u | \ tl-wdr4300 | \ tl-wr703n | \ tl-wr710n | \ diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 176c485..e64d2b4 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -212,6 +212,7 @@ mr600v2 |\ rb-411 |\ tl-mr10u |\ tl-mr11u |\ +tl-mr13u |\ tl-mr3020 |\ tl-mr3040 |\ tl-wa901nd |\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index e7fbfbe..e61db3d 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -141,6 +141,9 @@ tplink_board_detect() { "001101"*) model="TP-Link TL-MR11U" ;; + "001301"*) + model="TP-Link TL-MR13U" + ;; "302000"*) model="TP-Link TL-MR3020" ;; @@ -477,6 +480,9 @@ ar71xx_board_detect() { *"TL-MR11U") name="tl-mr11u" ;; + *"TL-MR13U") + name="tl-mr13u" + ;; *UniFi) name="unifi" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 8294fa4..8fbd395 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -161,6 +161,7 @@ platform_check_image() { archer-c7 | \ tl-mr10u | \ tl-mr11u | \ + tl-mr13u | \ tl-mr3020 | \ tl-mr3040 | \ tl-mr3220 | \ diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10 index 82559b8..0b91202 100644 --- a/target/linux/ar71xx/config-3.10 +++ b/target/linux/ar71xx/config-3.10 @@ -65,6 +65,7 @@ CONFIG_ATH79_MACH_TEW_632BRP=y CONFIG_ATH79_MACH_TEW_673GRU=y CONFIG_ATH79_MACH_TEW_712BR=y CONFIG_ATH79_MACH_TL_MR11U=y +CONFIG_ATH79_MACH_TL_MR13U=y CONFIG_ATH79_MACH_TL_MR3020=y CONFIG_ATH79_MACH_TL_MR3X20=y CONFIG_ATH79_MACH_TL_WA901ND=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c new file mode 100644 index 0000000..8b03645 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c @@ -0,0 +1,107 @@ +/* + * TP-LINK TL-MR13U board support + * + * Copyright (C) 2011 dongyuqi <[email protected]> + * Copyright (C) 2011-2012 Gabor Juhos <[email protected]> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define TL_MR13U_GPIO_LED_SYSTEM 27 + +#define TL_MR13U_GPIO_BTN_RESET 11 +#define TL_MR13U_GPIO_BTN_SW1 6 +#define TL_MR13U_GPIO_BTN_SW2 7 + +#define TL_MR13U_GPIO_USB_POWER 18 + +#define TL_MR13U_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_MR13U_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR13U_KEYS_POLL_INTERVAL) + +static const char *tl_mr13u_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_mr13u_flash_data = { + .part_probes = tl_mr13u_part_probes, +}; + +static struct gpio_led tl_mr13u_leds_gpio[] __initdata = { + { + .name = "tp-link:blue:system", + .gpio = TL_MR13U_GPIO_LED_SYSTEM, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tl_mr13u_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR13U_GPIO_BTN_RESET, + .active_low = 0, + }, + { + .desc = "sw1", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR13U_GPIO_BTN_SW1, + .active_low = 0, + }, + { + .desc = "sw2", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR13U_GPIO_BTN_SW2, + .active_low = 0, + }, +}; + +static void __init tl_mr13u_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ + ath79_setup_ar933x_phy4_switch(false, false); + + ath79_register_m25p80(&tl_mr13u_flash_data); + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr13u_leds_gpio), + tl_mr13u_leds_gpio); + ath79_register_gpio_keys_polled(-1, TL_MR13U_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_mr13u_gpio_keys), + tl_mr13u_gpio_keys); + + gpio_request_one(TL_MR13U_GPIO_USB_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "USB power"); + ath79_register_usb(); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + + ath79_register_mdio(0, 0x0); + ath79_register_eth(0); + ath79_register_wmac(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_TL_MR13U, "TL-MR13U", "TP-LINK TL-MR13U v1", + tl_mr13u_setup); diff --git a/target/linux/ar71xx/generic/profiles/tp-link.mk b/target/linux/ar71xx/generic/profiles/tp-link.mk index e63aa7a..b7d4ec0 100644 --- a/target/linux/ar71xx/generic/profiles/tp-link.mk +++ b/target/linux/ar71xx/generic/profiles/tp-link.mk @@ -38,6 +38,17 @@ endef $(eval $(call Profile,TLMR11U)) +define Profile/TLMR13U + NAME:=TP-LINK TL-MR13U + PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev +endef + +define Profile/TLMR13U/Description + Package set optimized for the TP-LINK TL-MR13U. +endef +$(eval $(call Profile,TLMR13U)) + + define Profile/TLMR3020 NAME:=TP-LINK TL-MR3020 PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 7f55e16..2f4aaec 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -911,6 +911,7 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ARCHERC7,archer-c7-v1,ARCHER-C7,t $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR10U,tl-mr10u-v1,TL-MR10U,ttyATH0,115200,0x00100101,1,4Mlzma)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR11UV1,tl-mr11u-v1,TL-MR11U,ttyATH0,115200,0x00110101,1,4Mlzma)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR11UV2,tl-mr11u-v2,TL-MR11U,ttyATH0,115200,0x00110102,1,4Mlzma)) +$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR13U,tl-mr13u-v1,TL-MR13U,ttyATH0,115200,0x00130101,1,4Mlzma)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR3020,tl-mr3020-v1,TL-MR3020,ttyATH0,115200,0x30200001,1,4Mlzma)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR3040V1,tl-mr3040-v1,TL-MR3040,ttyATH0,115200,0x30400001,1,4Mlzma)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR3040V2,tl-mr3040-v2,TL-MR3040,ttyATH0,115200,0x30400002,1,4Mlzma)) diff --git a/target/linux/ar71xx/patches-3.10/930-add-tl-mr13u-support.patch b/target/linux/ar71xx/patches-3.10/930-add-tl-mr13u-support.patch new file mode 100644 index 0000000..76891c5 --- /dev/null +++ b/target/linux/ar71xx/patches-3.10/930-add-tl-mr13u-support.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -516,6 +516,16 @@ config ATH79_MACH_TL_MR11U + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_TL_MR13U ++ bool "TP-LINK TL-MR13U support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_TL_MR3020 + bool "TP-LINK TL-MR3020 support" + select SOC_AR933X +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -83,6 +83,7 @@ enum ath79_mach_type { + ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */ + ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */ + ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */ ++ ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */ + ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */ + ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */ + ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -79,6 +79,7 @@ obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += m + obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o + obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o + obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o ++obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o + obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o + obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o + obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o diff --git a/tools/firmware-utils/src/mktplinkfw.c b/tools/firmware-utils/src/mktplinkfw.c index 19dc2b4..2574678 100644 --- a/tools/firmware-utils/src/mktplinkfw.c +++ b/tools/firmware-utils/src/mktplinkfw.c @@ -31,6 +31,7 @@ #define HEADER_VERSION_V1 0x01000000 #define HWID_TL_MR10U_V1 0x00100101 +#define HWID_TL_MR13U_V1 0x00130101 #define HWID_TL_MR3020_V1 0x30200001 #define HWID_TL_MR3220_V1 0x32200001 #define HWID_TL_MR3220_V2 0x32200002 @@ -199,6 +200,11 @@ static struct board_info boards[] = { .hw_rev = 1, .layout_id = "4Mlzma", }, { + .id = "TL-MR13Uv1", + .hw_id = HWID_TL_MR13U_V1, + .hw_rev = 1, + .layout_id = "4Mlzma", + }, { .id = "TL-MR3020v1", .hw_id = HWID_TL_MR3020_V1, .hw_rev = 1, -- 1.8.4
tl-mr13u.patch
Description: Binary data
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
