2013.09.20. 0:04 keltezéssel, Sebastian Kemper írta: > Hello list, > > This patch adds to the default LED configuration. The blue power LED > defaults to on. With the activation of "wan_led_switch_ctrl" we hand off > control of the blue planet LED to the hardware switch; this means also > that it will be enabled when the router starts. WLAN_2G LED also enabled > by default. > > I haven't yet figured out how to setup GPIO 32 for WLAN_5G. Hopefully > that will follow later :) > > Signed-off-by: Sebastian Kemper <[email protected]> > > diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds > b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds > index f55f1fe..5e8e505 100755 > --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds > +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds > @@ -70,9 +70,15 @@ dir-615-e4) > ucidef_set_led_switch "lan4" "LAN4" "d-link:green:lan4" "switch0" "0x10" > ;; > > -dir-825-b1 | \ > +dir-825-b1) > + ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1" > + ;; > + > dir-825-c1) > ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1" > + ucidef_set_led_default "wan" "Switch controls blue planet LED" > "d-link:none:wan_led_switch_ctrl" "1"
This line should be removed along with the LED definition in mach-dir-825-c1.c file. > + ucidef_set_led_default "power" "Power Blue: on" "d-link:blue:power" "1" Once the LED name will be fixed in diag.sh, this line will be obsolete as well. > + ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz LED" "d-link:blue:wlan2g" > "phy0tpt" > ;; > > hornet-ub) > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
