Hi Stefan, <...>
>> Correct. I had to modify ubox to make it work correctly with JFFS2 on >> emulated >> MTD devices. > On my device, when using ubox without any patchs, I get errors, but it > worked somehow... Weird. For me it was working only at the first boot after flashing the image, but any modifications in the fs has been lost after subsequent reboots. > I already tested UBIFS on the device by manually overlaying it, > technically things look good. But to support proper UBIFS instead of > JFFS2 we would need another bunch of changes to ubox and also quite a > lot of changes to the init scripts. What do you think, were to begin on > this matter? I have no idea, I did not look into that too deep yet. >> AFAIK the WAN port is not connected to the second ethernet interface, so we >> are >> using VLANs to separate that from the LAN ports. It is working, but >> currently it >> uses the same MAC address as the LAN interface. Additionally, this MAC >> address >> is a randomly genereated one. We should read the correct MAC from the flash >> and >> set the interface MAC addresses based on that. > You're right, its already configured correctly on eth0.2. Just tested > the WAN port, looks good on my device. > > Thanks for your great work! Having mainline OpenWRT on it, I really like > this device! ;) -Gabor _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
